Operation Manual

To repeat a chapter (DVD) or one or all tracks (CD):
 - Press the REPEAT button (16) once to repeat the current chapter or track.
 To view a specific title of a DVD, press the TITLE button (10). Use the arrow buttons to select the
title.
 To switch on the subtitles of a DVD, press the SUBTITLE button (25). Press the button again to
switch off the subtitles.
 To select the camera angle, press the ANGLE button (19).
 To select the audio language of a DVD, press the AUDIO button (12) repeatedly until the desired
language is set.
 To switch between sound effects (hall/concert/cave/bathroom), press the S.EFFECT button (14).
 Press the GOTO (3) button to acces the quick menu. Use numerical buttons to input track
number and track time. Press ENTER to confirm a selection.
 Push the GOTO (3) button to load the quick start menu. Then select the desired time and number
and push the ENTER (26) button, followed by the GOTO button.
Using the A-B REPEAT function
 The A-B REPEAT function can be used to repeat a specific section of a DVD.
 Press the A-B REPEAT button (17) once to select the starting point (A).
 Press the A-B REPEAT button again to select the ending point (B). The appliance plays the
section repeatedly.
 To cancel the A-B REPEAT function, press the A-B REPEAT button again. The appliance will
resume the normal playback.
Please note:
 Normally, if an MP3 disc is loaded, the unit will take longer time to read the initial data.
 A DVD that does not match the region code cannot be read by this appliance.
 If a disc contains mixed content (e.g. MP3 and video files), the appliance will only recognise, list
and play one content type.
Using the PROGRAM function
For video discs and audio CDs
 Turn on the television.
 Press the PROGRAM button (7) to enter the PROGRAM function.
 Press the digit buttons (2) to select a desired track, and use the arrow button down to highlight
the next entry.
 To confirm the selection and start the program, move the highlight to "START" and press the
ENTER (26) button.
 Press the button PLAY/ PAUSE (4) to start program playback.
Using the MP3/MPEG4 playback function
 Insert an MP3/MPEG4 disc. A content menu will display on the TV screen.
 Press the up/down arrow buttons to select a folder or a file.
 Press ENTER (26) to enter the selected folder or file.
 Press the MENU button (28) to return to the content menu during playback.