AMD350 Manual o o o o o o o o o o o o o o o o o o o o Index 1. Intended use 2. Safety 2.1. Labels in this manual 2.2. General safety instructions 3. Preparations for use 3.1. Unpacking 3.2. Package contents 4. Installation 4.1. Install batteries 4.2. Connecting the system 4.3. Connecting random equipment 4.4. Connecting to the mains 5. Functions 5.1. Remote control 5.2. AMD350 Microset 6. Operation 6.1. Quick start 6.2. General setup menu operation 6.3. Clock functions 6.4.
1.Intended use The DVD Microset plays music from CDs and music, videos and photos from DVDs and USB. The appliance also plays music from iPad/iPhone/iPod. The Microset can be controlled by bluetooth. Read the manual carefully before the first use. DVDs and DVD appliances are manufactured under the worldwide agreed DVD regional code system that the appliance will operate only with corresponding disc of the same regional code.
2.Safety 2.1. Labels in this manual WARNING A warning means that injury or death is possible if the instructions are not obeyed. CAUTION A caution means that damage to the equipment is possible. A note gives additional information, e.g. for a procedure. 2.2. General safety instructions WARNING Do not put force on the appliance. The appliance can fall and can cause serious injury. CAUTION Do not spill any liquid on the appliance. WARNING Do not insert any objects in the ventilation holes.
3.Preparations for use 3.1. Unpacking Unpack the appliance carefully. Check the package contents as described below. If any item is missing, please contact your reseller. Remove the labels from the front panel carefully if present. We recommend that you retain the original carton and packing materials in case it ever becomes necessary to return your product for service. This is the only way to safely protect the product against damage in transit.
4.Installation 4.1. Install batteries Install batteries Remove the battery cover. Insert the batteries matching the (+) and (-) polarity markings. CAUTION Incorrect installation can cause battery leakage and corrosion which will damage the appliance. Corrosion, oxidation, battery leakage and any other gradually acidic defect of this nature will invalidate the guarantee. 4.2. Connecting the system Connect the speakers to the appliance.
4.3. Connecting random equipment Connect the tv Use one of the cables as presented in the image below. To connect the aerial to the appliance: Insert an FM aerial or a suitable cable into the connection.
4.4. Connecting to the mains Connect the appliance to the mains. Switch on the appliance.
5.Functions 5.1. Remote control 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17.
18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. A-B button EQ button OPEN/ CLOSE button CLOCK button TIMER button PROG button SLEEP button TUNER button DOCK button MUTE button OSD/RDS button VOLUME button (+/-) MENU button ANGLE button ZOOM button AUDIO button DIM button SHUFFLE button SURROUND button By pressing the button EQ (19) the desired music mode (POP/JAZZ/ROCK/CLASSIC/FLAT) can by selected. Press the button DIM (35) to select the brightness level.
5.2. AMD350 Microset 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. POWER/ STANDBY DISPLAY Docking cover iPad/ iPhone/ iPod dock USB 2.0 slot AUX jack: 3.
6.Operation All functions of the appliance are accessible using the remote control. All instructions refer to operation with the remote control, unless indicated otherwise. 6.1. Quick start General functions Set the appliance in the standby mode. To switch on the appliance, press the STANDBY button (1). To switch back to the standby mode, press the STANDBY button (1) again. To adjust the volume, press the VOL + button or the VOL - button (29). To mute or restore sound, press the MUTE button (27).
DVD/CD functions Turn on the television. Switch on the appliance. To select the source mode DVD/ CD, press the DISC button (5). Place a disc in the disc tray Press the OPEN (20) button (on the appliance) to open the disc tray. The display shows the total number of tracks on the CD. To start playback, press the PLAY/PAUSE button (8) once. To stop playback, press the STOP button (9). For extended instructions, read the paragraph DVD/CD functionsfurther on in this manual.
6.2. General setup menu operation This chapter explains a complete setup of the appliance: settings of screen display, audio setup and video setup. General settings menu To change the initial settings The following actions have to be carried out with the remote control. Press the SETUP button (13). Press the arrow buttons (left and right) (12) to select a menu. The submenu is displayed directly. Press the arrow buttons (up and down) (12) to scroll through the submenu.
Picture format In the TV DISPLAY section, press the arrow buttons (12) to select 4:3 4:3 PANSCAN or 4:3 LETTERBOX for a conventional TV set. Select 16:9 for a wide screen TV set. OSD LANG In the OSD LANG section, press the arrow buttons to choose the language. Screensaver on/off. The screensaver will be turned on automatically when there is no picture. last memory: on/off When the DVD is paused, playback will automatically resume from where last stopped.
SET PASSWORD Change the default password. Enter the current password in the first box. Enter the new password in the second box. Enter the new password again in the third box to confirm. The default password (0000) is always active. Even if the password has been reset. DEFAULT Restore all default settings of the appliance, except the settings for the menu items PARENTAL and PASSWORD. 6.3.
Preparation Set the appliance in the standby mode. Setting the current time Press and hold the CLOCK button (21). The hour digits start flashing. Set the hour To do this, press the arrow buttons (12). Press ENTER (11) to confirm. Set the minutes To do this, press the arrow buttons (12). Press ENTER (11) to confirm. Setting the timer Set the appliance in the standby mode. Press and hold the TIMER button (22). The LED display will show TIMERSET.
6.4. DVD/CD functions Preparation Turn on the television. After the disc has been loaded, a content menu will display on the TV screen. Press the arrow buttons (12) to select a menu item. Press the ENTER button (11) to enter the selected menu item. During playback, the following functions are available: To select a chapter (DVD) or track (CD), press the digit buttons (2). To select the next or previous chapter (DVD) or track (CD), press the PREV button (10) or the NEXT button (30).
To select the camera angle, press the ANGLE button (32). To select the audio language of a DVD, press the AUDIO button (34) repeatedly until the desired language is set. Press the GOTO button to acces the quick menu. Use numerical buttons to input track number and track time. Press ENTER to confirm a selection. Using the A-B REPEAT function The A-B REPEAT function can be used to repeat a specific section of a DVD. Press the A-B REPEAT button (18) once to select the starting point (A).
Using the ZOOM function This function can be used for zooming in and out on photos and DVDs. The available zoom ratios are: 2x, 3x, 4x, 1/2, 1/3, 1/4. Press the ZOOM button (31). Press the ZOOM (31) button again to set the correct size. Press the arrow buttons (11) to move through the picture. Using the Kodak picture CD playback function Insert a Kodak picture CD. Press the STOP button (32) to enter the thumbnail mode.
6.5. Radio functions Press the TUNER key (25) to select the radio mode. Set pre-set stations Press and hold the PROG (23) button for 2 seconds to activate automatic programming. The LED display will show AUTO. Press the PREV (10) Button or the NEXT (30) Button to select the desired station. You can also scan manually. To do this, press the arrow buttons (12).
6.6. USB functions Preparation Turn on the television. Insert the USB device in the slot . The device can only be connected one way. Press the USB button (4). After the device has been connected, a content menu will display on the TV screen. Press the arrow button (12) (up and down) to select a folder or a file. Press the ENTER button (11) to enter the selected folder or file. You can also use the digit buttons to select a folder or to play the file.
Due to the great variety of products with USB ports and their sometimes quite manufacturerspecific functions we can neither guarantee that all devices will be recognised, nor that all operating options that are possible in theory will actually work. 6.7. AUX IN Connect the external appliance to your AMD350 Microset. Select AUX mode. Use the AUX (6) key for this.
6.8. iPad/ iPhone/ iPod functions Place the iPad in the docking station Press the DOCK button (26). The LED display will show IPOD. It could take around 15 seconds for the AMD350 to identify the iPod/iPhone/iPad. To start playback, press the PLAY/ PAUSE button (8) once. The iPod/iPhone/iPad will automatically start charging once it is docked onto the AMD350.
6.9. Operation with BLUETOOTH You can wirelessly connect the AMD350 to devices that have Bluetooth A2DP. Establishing a Bluetooth connection (PAIREN) Turn on the Bluetooth function of your device To select the source mode BLUETOOTH, press the TUNER button (25). Press and hold the button PLAY/ PAUSE (8) to activate the Bluetooth pairing mode.
7.Cleaning and maintenance WARNING Before performing any cleaning or maintenance, switch off and unplug the appliance. Clean the outside of the appliance with a soft cloth. When the appliance is very dirty, dampen the cloth slightly with water and a neutral solution. 7.1. Handle and care of a disc Hold the disc with fingers. Hold the disc outer edge and/or the centre spindle hole. Do not touch the disc surface. Do not bend or press the disc.
9.Disposal of used electrical and electronic equipment The meaning of the symbol on the material, its accessory or packaging indicates that this product shall not be treated as household waste. Please, dispose of this equipment at your applicable collection point for the recycling of electrical and electronic equipments waste. In the European Union and Other European countries which there are separate collection systems for used electrical and electronic product.