AMN250UC Manual Index o o o o o o o o o o o o o o o o o o 1. Intended use 2. Safety 2.1. Labels in this manual 2.2. General safety instructions 3. Preparations for use 3.1. Unpacking 3.2. Package contents 4. Installation 4.1. Install batteries 4.2. Connecting the system 4.3. Connecting random equipment 4.4. Connecting to the mains 5. Functions 5.1. Remote control 5.2. AMN250UC DVD Micro System 6. Operation 6.1. Quick start 6.2. General setup menu operation 6.3. DVD/CD functions 6.4.
1. Intended use The DVD Micro System plays music from CDs and music, videos and photos from DVDs and USB. The appliance also plays photos from Kodak picture CDs. Read the manual carefully before the first use. DVDs and DVD appliances are manufactured under the worldwide agreed DVD regional code system that the appliance will operate only with corresponding disc of the same regional code.
2. Safety 2.1. Labels in this manual WARNING A warning means that injury or death is possible if the instructions are not obeyed. CAUTION A caution means that damage to the equipment is possible. A note gives additional information, e.g. for a procedure. 2.2. General safety instructions WARNING Do not put force on the appliance. The appliance can fall and can cause serious injury. CAUTION Do not spill any liquid on the appliance. WARNING Do not insert any objects in the ventilation holes.
3. Preparations for use 3.1. Unpacking Unpack the appliance carefully. Check the package contents as described below. If any item is missing, please contact your reseller. Remove the labels from the front panel carefully if present. We recommend that you retain the original carton and packing materials in case it ever becomes necessary to return your product for service. This is the only way to safely protect the product against damage in transit.
4. Installation 4.1. Install batteries Install batteries Remove the battery cover. Insert the batteries matching the (+) and (-) polarity markings. CAUTION Incorrect installation can cause battery leakage and corrosion which will damage the appliance. Corrosion, oxidation, battery leakage and any other gradually acidic defect of this nature will invalidate the guarantee. 4.2. Connecting the system Connect the speakers to the appliance.
4.3. Connecting random equipment Connect the tv Use one of the cables as presented in the image below. To connect the aerial to the appliance: o Insert an FM aerial or a suitable cable into the connection.
4.4. Connecting to the mains Connect the appliance to the mains. Switch on the appliance.
5. Functions 5.1. Remote control 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. STANDBY button Digit buttons GOTO button SETUP button PBC button PROGRAM button VOLUME button (+/-) FAST FORWARD button FAST REWIND button TITLE button Arrow buttons AUDIO button S.
19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. MUTE button ANGLE button V-MODE button SOURCE SELECT button OSD button NEXT button PREVIOUS button SUBTITLE button ENTER button MENU button CH-LEVEL button TONE button ZOOM button STOP button A-B button Radio 1. STANDBY button 2. Digit buttons 8. SEARCH (+/-) button 11.MEMORY button 23.RADIO (+/-) button 24. AUTO button 26. MO/ST button 30.
5.2. AMN250UC DVD Micro System 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12.
13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32.
6. Operation All functions of the appliance are accessible using the remote control. All instructions refer to operation with the remote control, unless indicated otherwise. 6.1. Quick start General functions Set the appliance in the standby mode. To switch on the appliance, press the STANDBY button (1). To switch back to the standby mode, press the STANDBY button (1) again. Use the SOURCE (22) key to select LINE-IN, DVD, or TUNER.
DVD/CD functions Turn on the television. Switch on the appliance. To select the source mode DVD, press the SOURCE button (22). Place a disc in the disc tray Press the OPEN (17) button (on the appliance) to open the disc tray. The display shows the total number of tracks on the CD. To start playback, press the PLAY/PAUSE button (18) once. For extended instructions, read the paragraph DVD/CD functionsfurther on in this manual. Tuner functions Switch on the appliance.
6.2. General setup menu operation This chapter explains a complete setup of the appliance: settings of screen display, audio setup and video setup. General settings menu To change the initial settings The following actions have to be carried out with the remote control. Press the SETUP button (4). Press the arrow buttons (left and right) (11) to select a menu. The submenu is displayed directly. Press the arrow buttons (up and down) (11) to scroll through the submenu.
Picture format In the TV DISPLAY section, press the arrow buttons (11) to select 4:3 4:3 PANSCAN or 4:3 LETTERBOX for a conventional TV set. Select WIDE SQUEEZE for a wide screen TV set. In the ANGLE MARK section, press the arrow buttons to switch this function ON or OFF. When switched ON, the appliance shows the angle mark when multi-camera angles are available. OSD LANG In the OSD LANG section, press the arrow buttons to choose the language.
Dolby digital audio setup DUAL MONO STEREO: for stereo effect. R-Mono: right channel only. L-Mono: left channel only. Mix-Mono: the average of both the left and right channel. This function is only available for Dolby AC-3 encoded 2-channel discs. DYNAMIC Select the value for the dynamic range compression to avoid losing sound details resulting from a low volume. Video setup page RESOLUTION: select the desired resolution. OFF: Select this format when the Composite video output is used.
Rating setup page PARENTAL Set a rating for movies played by the appliance. Movies rated higher than the level set for the parental lock can not be viewed. The password to reset the rating is 136900. This function is only available with discs that have parental rating encoded. SET PASSWORD Change the default password. Enter the current password in the first box. Enter the new password in the second box. Enter the new password again in the third box to confirm.
After the disc has been loaded, a content menu will display on the TV screen. Press the arrow buttons (11) to select a menu item. Press the ENTER button (27) to enter the selected menu item. During playback, the following functions are available: To select a chapter (DVD) or track (CD), press the digit buttons (2). To select the next or previous chapter (DVD) or track (CD), press the PREV button (25) or the NEXT button (24).
Using the MP3/MPEG4 playback function Insert an MP3/MPEG4 disc. A content menu will display on the TV screen. Press the up/down arrow buttons (11) to select a folder or a file. Press ENTER (27) to enter the selected folder or file. Press the MENU button (28) to return to the content menu during playback. Using the ZOOM function This function can be used for zooming in and out on photos and DVDs. The available zoom ratios are: 2x, 3x, 4x, 1/2, 1/3, 1/4. Press the ZOOM button (31).
6.4. Radio functions Press the SOURCE key (22) to select the radio mode. To switch between Mono and Stereo reception, press the MO/ST button (28). Set pre-set stations Search for the desired frequency with the SEARCH + button (7) or the SEARCH - button (8). Press the MEMORY button (12) when the desired frequency is found. Select the desired preset number with the digit buttons (2) to save the frequency as a preset station. Use the number keys to set the frequency of the pre-set station.
6.5. LINE-IN Connect the external appliance to your AMN250UC DVD Micro System. To select the source mode LINE-IN, press the SOURCE button (22). 6.6. USB and memory card Preparation Turn on the television.
USB functions Insert the USB device in the slot . The device can only be connected one way. To select the source mode DVD, press the SOURCE button (22). Press the USB/ MEMORY CARD button (14). Memory card functions Insert the SD/MMC device in the slot. The device can only be connected one way. To select the source mode DVD, press the SOURCE button (22). Press the USB/ MEMORY CARD button (14). After the device has been connected, a content menu will display on the TV screen.
6.7. Karaoke function Please note: Switch the microphone to on in the SETUP menu. The karaoke function allows you to sing along with your favourite music. To connect the microphone, insert the cable plug in the microphone jack. Press the OPEN/CLOSE button (17). Place a karaoke disc in the disc tray. To select the source mode DVD, press the SOURCE button (22). Press (12) to include or eliminate the original singing voice. To adjust the volume, press the VOL + button or the VOL - button (9).
7. Cleaning and maintenance WARNING Before performing any cleaning or maintenance, switch off and unplug the appliance. Clean the outside of the appliance with a soft cloth. When the appliance is very dirty, dampen the cloth slightly with water and a neutral solution. 7.1. Handle and care of a disc Hold the disc with fingers. Hold the disc outer edge and/or the centre spindle hole. Do not touch the disc surface. Do not bend or press the disc.
8.
9. Disposal of used electrical and electronic equipment The meaning of the symbol on the material, its accessory or packaging indicates that this product shall not be treated as household waste. Please, dispose of this equipment at your applicable collection point for the recycling of electrical and electronic equipments waste. In the European Union and Other European countries which there are separate collection systems for used electrical and electronic product.