Microset: Radio / (MP3)CD-player with USB-port and card reader ALD1915H User manual Gebruiksaanwijzing Manuel de l’utilisateur Manual de instrucciones Gebrauchsanleitung Οδηγίες χρήσεως Brugsanvisning GB 2 NL 21 FR 41 ES 60 DE 79 EL 99 DA119
Table of contents 1. 2. 3. 4. 5. 6. Safety............................................................................ 3 1.1 1.2 1.3 Intended use.....................................................................3 Labels in this manual........................................................3 General safety instructions...............................................3 2.1 2.2 Unpacking.........................................................................4 Package contents.........................
AMP110 1. Safety 1.1 Intended use The Micro Music System plays music from USB, memory card, CD and radio. Read the manual carefully before first use. i Due to the great variety of products with external memory connection (USB, SD/MMC, etc.) and their sometimes quite manufacturerspecific functions we can neither guarantee that all devices will be recognised, nor that all operating options that are possible in theory will actually work. 1.
! CAUTION Do not block the ventilation holes. i This appliance is double insulated; therefore no earth wire is required. Always check that the mains voltage corresponds to the voltage on the rating plate. L This appliance employs a laser system. To prevent direct exposure to the laser beam, do not open the appliance. Visible laser radiation when open and interlock defeated. 2. Preparations for use 2.1 Unpacking ● Unpack the appliance carefully. ● Check the package contents as described below.
AMP110 i If any item is missing, please contact your reseller. 3. Installation ● Put the appliance on a horizontal flat surface. ● Connect the speakers to the appliance. Read the paragraph "Installing the speakers". ● Connect the random equipment to the appliance. Read the paragraph "Connecting random equipment". ● Connect the appliance to the mains. ● Install the batteries in the remote control. Read the paragraph "Remote control". ! CAUTION ● Do not put the appliance near a heat source.
3.1 Installing the speakers The cables and terminals are colourcoded: - Wires with markings connect to red terminals (+). - Wires without markings connect to black terminals (-). ● Place the speakers on a horizontal flat surface. Place the speakers close enough to the appliance to be able to connect the wires. Connection to the appliance ● Lift the latches to open the terminals. ● Connect the wire ends of the speakers to the appliance matching the (+) and (-) polarity markings.
AMP110 3.2 Connecting random equipment 1 2 3 4 5 6 7 15 14 13 12 11 10 8 9 Audio connections (input) These connections allow you to receive audio signal from a connected CD/DVD player or amplifier. The appliance has the following audio inputs: ● AUX IN: Connect a suitable cable to the AUX IN jack (8).
Aerial connection (FM radio) ● Insert an FM aerial or a suitable cable into the FM ANTENNA connection. Aerial connection (AM radio) ● Insert an AM aerial or a suitable cable into the AM ANTENNA connection. ● Place the aerial on a horizontal flat surface. Place the aerial close enough to the appliance to be able to connect the wires. ● To connect the aerial to the appliance: • Press the latches to open the terminals. Keep the latches depressed. • Connect the wire ends to the appliance.
AMP110 4. Functions 4.
4.
AMP110 5. Operation All functions of the appliance are accessible using the remote control. All instructions refer to operation with the remote control, unless indicated otherwise. 5.1 General functions ● To switch on the appliance, press the STANDBY button (16). To switch off the appliance, press the STANDBY button (16) again. ● To select the source mode (TUNER/CD/USB/SD), press the FUNCTION button (17). Alternatively, press the corresponding function button (25/26/34/35).
● Press the NEXT button (40) or the PREV button (19) to set the desired minutes. ● Press the CLOCK ADJ button (31) to store the setting and exit. Setting the alarm time Two time slots are available (ALARM1 and ALARM2). ● Select the required time slot: • To select ALARM1, press the corresponding button ALARM1. The display (4) shows the time and flashes. • To select ALARM2, press the corresponding button ALARM2. The display (4) shows the time and flashes.
AMP110 Snooze alarm The default snooze time is: 5 minutes. ● To snooze the alarm, press the SNOOZE button (29) while the alarm sounds. The alarm sounds again after the snooze time has elapsed. ● To stop the alarm, press the STANDBY button (16) while the alarm sounds. The alarm is automatically set for the next day. 5.4 Using the SLEEP function The default sleep time is: 90 minutes. ● To activate the SLEEP function, press the SLEEP button (33).
● Press the PRESET UP button (22) or the PRESET DN button (23) to select the desired radio station. ● Press the PROG button (39) to confirm the selection. 5.6 CD functions ● Switch on the appliance. Select the CD mode. ● To insert a CD: • Press the OPEN/CLOSE button (45)(45) to open the disc tray (9). • Insert the CD with the label upwards. • Press the OPEN/CLOSE button (45)(45) to close the disc tray (9). The display shows the total number of tracks on the CD.
AMP110 ● To program an MP3 CD: • Press the STOP button (20). • Press the PROG button (39). • Press the FOLDER UP button (22) or the FOLDER DN button (23) to select a folder or a file. • Press the NEXT button (40) or the PREV button (19) to select a track. • Repeat the previous step to select more tracks and confirm every selection with the PROG button (39). ● Press the PLAY/PAUSE button (41) to start the program. ● To play the program again, press the PROG button (39) after the program has finished.
5.8 Memory card functions ● Switch on the appliance. Select the memory card mode. ● Insert the SD/MMC device in the slot (11). The device can only be connected one way. ● To start playback, press the PLAY/PAUSE button (41) once. ● Press the FOLDER UP button (22) or the FOLDER DN button (23) to select a folder or a file. ● Press the NEXT button (40) or the PREV button (19) to select a track. ● Press the PLAY/PAUSE button (41) to start playback.
AMP110 6.1 Handle and care of a disc ● Hold the disc with fingers. Hold the disc outer edge and/or the centre spindle hole. Do not touch the disc surface. ● Do not bend or press the disc. Do not expose the disc to direct sunlight or heating sources. ● Clean the disc surface with a soft, dry cleaning cloth. Wipe the disc surface gently, radially, from centre towards the outer edge. ● Do not apply thinner, alcohol, chemical solvent, or sprays when cleaning.
USB playback Trouble Action No playback USB device is not installed or installed incorrectly. Insert USB device into slot. Incompatible USB device used. Playback using any USB device cannot be guaranteed. Please try another USB device. AUX Trouble Action No sound on the unit system Input source is low. Increase the volume level on the audio source device. No picture Check if the TV is switched on and set to the correct A/V input. Check cables for connection problems. Check cables for damage.
AMP110 8. Technical data Parameter Voltage Power consumption Standby power consumption Max. power output Disc size Radio bands Dimensions (W x H x D) Weight Frequency range Parameter AM radio FM radio Speaker system Parameter Impedance Cabinet material Wire length Dimensions (W x H x D) Weight Remote control Parameter Power consumption Battery size Working environment Parameter Operating temperature Relative humidity Value 230 VAC ~ 50 Hz 30 W 1.5 W 2x5 W (RMS) 5"/3" AM/FM 15 x 22 x 23 mm 1.
9. isposal of used electrical D and electronic equipment Z The meaning of the symbol on the material, its accessory or packaging indicates that this product shall not be treated as household waste. Please, dispose of this equipment at your applicable collection point for the recycling of electrical and electronic equipments waste. In the European Union and Other European countries which there are separate collection systems for used electrical and electronic product.
For more information, please visit www.akai.
