Walkie Talkie APMP100 User manual
Table of contents 1. 1.1 1.2 1.3 2. 2.1 2.2 2.3 3. 4. 4.1 4.2 4.3 4.4 4.5 4.6 4.7 5. 6. 7. 3 Safety Intended use Labels in this manual General safety instructions Preparations for use Unpacking Package contents Insert batteries 3 3 4 4 4 5 6 Functions 7 Operation 8 Turning the device on and off.
APMP100 1. Safety 1.1 Intended use The APMP100 is intended for sending voice messages and signals to other APMP100 users. Read the manual carefully before the first use. 1.2 Labels in this manual CAUTION A caution means that damage to the equipment is possible. A note gives additional information, e.g. for a procedure.
1.3 Algemene veiligheidsvoorschriften CAUTION Do not spill any liquid on the appliance. 2. Preparations for use 2.1 Unpacking • Unpack the appliance carefully. • Check the package contents as described below. If any item is missing, please contact your reseller. • Remove the labels from the front panel carefully if present. We recommend that you retain the original carton and packing materials in case it ever becomes necessary to return your product for service.
APMP100 2.2 Package contents The following items are included in the received package: 2 1 APMP100 Quick start guide If any item is missing, please contact your reseller.
2.3 a Insert batteries b c 2 1 2 1 3x AAA Insert the batteries (3 x AAA) matching the (+) and (-) polarity markings. Please note: batteries not included.
APMP100 3.
4. Operation 4.1 Turning the device on and off. • Keep the POWER key (3) pressed down. You will hear a beep. The display (9) lights up. The device has now been turned on. 4.2 3 Adjusting the volume • Press the UP and DOWN key (5) to adjust the volume.
APMP100 4.3 Selecting a channel The APMP100 has eight channels. In order to communicate with other APMP100 users, all devices must be set to the same channel. • Press the MENU key once (4). • The current channel starts flashing on the display (6). 6 • Use the UP and DOWN keys (11) to make your selection. 4 • Press the MENU key (2) to store your settings. 5 4.4 Receiving Once the device has been turned on, you can start receiving. 4.
4.6 Call-Ringtone You can use the Call Ringtone to notify other APMP100 users on your channel that you wish to send them a message. • To do this, press the CALL key (7). 7 4.7 Roger Beep The Roger Beep is a tone that is automatically transmitted when the PTT key (2) is released. This way the receiver knows that the message has been completed.
APMP100 5. Cleaning and maintenance • Clean the outside of the appliance with a soft cloth. When the appliance is very dirty, dampen the cloth slightly with water and a neutral solution. 6. Technical data Number of channels Frequency band Transmitting power Coverage 8 446Mhz 500mW MAX 3 km Digital volume control Roger Beep; conversation confirmation tone Call signal Can be used without a licence in, for instance, the Benelux.
7. Disposal of used electrical and electronic equipment The meaning of the symbol on the material, its accessory or packaging indicates that this product shall not be treated as household waste. Please, dispose of this equipment at your applicable collection point for the recycling of electrical and electronic equipments waste. In the European Union and Other European countries which there are separate collection systems for used electrical and electronic product.
