Walkie Talkie APMP500 User manual
Table of contents 1. 1.1 1.2 1.3 2. 2.1 2.2 2.3 2.4 3. 4. 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 4.10 4.11 4.12 4.13 4.14 4.15 4.
APMP 500 Copyright notice Design and specifications are subject to change without notice.
1. Safety 1.1 Intended use The APMP500 is intended for sending voice messages and signals to other APMP500 users. Read the manual carefully before the first use. 1.2 Labels in this manual CAUTION A caution means that damage to the equipment is possible. A note gives additional information, e.g. for a procedure.
APMP 500 1.3 General safety instructions CAUTION Do not spill any liquid on the appliance. 2. Preparations for use 2.1 Unpacking • Unpack the appliance carefully. • Check the package contents as described below. If any item is missing, please contact your reseller. • Remove the labels from the front panel carefully if present. We recommend that you retain the original carton and packing materials in case it ever becomes necessary to return your product for service.
2.2 Package contents The following items are included in the received package: 2 2 1 1 1 APMP500 Battery pack Dockingstation Adapter Quick start guide If any item is missing, please contact your reseller.
APMP 500 2.3 a Place the battery b c2 1 2 1 Insert the battery according to the (+) and (-) polarity markings. 2.4 Charge the battery Place the APMP500 in the battery charger.
3.
APMP 500 4. Operation 4.1 Turning the device on and off • To switch on the appliance, keep the POWER key(9) pressed down for three seconds. • To switch off the appliance, press the POWER key (9) down again for three seconds. 4.2 9 Adjusting the volume • Press the UP or DOWN key (11) to adjust the volume.
4.3 Selecting a channel The APMP500 has eight channels. In order to communicate with other APMP500 users, all devices must be set to the same channel. • Press the MENU key once (4). • The current channel starts flashing on the display (6). • Use the UP and DOWN keys (11) to make your selection. • Press the PTT key (2) to store your settings. 4.4 6 2 4 11 Selecting the CTCSS Sub Channel Each channel also has 30 sub channels, which allow you to set up a private group within a channel.
APMP 500 4.5 Receiving Once the device has been turned on, you can start receiving. 4.6 Transmitting • Keep the PTT key (2) pressed down in order to send a message. • Release the PTT key when you have finished talking.
4.7 Monitor You can use the Monitor function to search for weak signals on the channel you have selected. • Keep the MENU and the DOWN key (4 + 12) pressed down at the same time. • Your APMP500 will receive signals and background noises on your channel. • Press the MENU key (4) to stop the Monitor function. 4.8 4 12 VOX (Voice Activated) When the VOX mode is enabled, the APMP500 will transmit a signal when it is activated by your voice or other noises.
APMP 500 4.9 Auto Channel Scan Channel Scan searches for signals on all 8 channels, 38 CTCSS sub channels or 83 Advanced Digital DCS Codes. Scan Channel • Keep pressing the MENU key until the “SC” symbol and the current channel start flashing on the display (6). • Press the “Up” or “Down” key (11) to start the scan. • When the APMP500 detects a signal it will automatically pause.
4.10 Call-Ringtone You can use the Call Ringtone to notify other APMP500 users on your channel that you wish to send them a message. • To do this, press the CALL key (3). Call Ringtone set-up The APMP500 has 5 Call Ringtones to choose from. 6 • Keep pressing the MENU key until the “CA” symbol appears on the display and “01” is flashing. • Use the UP and DOWN keys (11) to make your selection. • Press the PTT key (2) to store your settings. 4.
APMP 500 4.12 Setting the keypad sound • Keep pressing the MENU key until the “TO” symbol appears on the display (6) and “On” is flashing. • Use the UP and DOWN keys (11) to make your selection. • Press the PTT key (2) to store your settings. 6 2 4 11 4.13 Dual watch This function allows you to receive two channels at the same time. • Keep pressing the MENU key until the “DCM” symbol appears on the display (6) and “OF” is flashing. • Use the UP and DOWN keys (11) to make your selection.
4.14 Key lock The key lock function locks the keys. 6 • Keep the MENU key (4) pressed down until the key symbol appears on the display (6). The key lock function has now been enabled. • Keep the MENU key (4) pressed down once more in order to disable the key lock. 4.15 4 Stopwatch • Keep the CALL key (3) pressed down for three seconds and the Stopwatch symbol will appear on the display (6). • Press the UP key (13) to start and stop the stopwatch. • Press the DOWN key (12) to reset the stopwatch.
APMP 500 5. Cleaning and maintenance • Clean the outside of the appliance with a soft cloth. When the appliance is very dirty, dampen the cloth slightly with water and a neutral solution. 6.
7. Disposal of used electrical and electronic equipment The meaning of the symbol on the material, its accessory or packaging indicates that this product shall not be treated as household waste. Please, dispose of this equipment at your applicable collection point for the recycling of electrical and electronic equipments waste. In the European Union and Other European countries which there are separate collection systems for used electrical and electronic product.
