Operating instructions

NOTES:
• f the PLAY/PAUSE button is pressed before the PROGRAM/Clock-Display button is
pressed to store a track, the track will not be programmed, and the disc will start playing from
the first selected track.
• Any track can be programmed to play more than once.
• Repeatedly pressing the PROGRAM/Clock-Display button will enable you to check the
program if required.
LISTENING TO PROGRAMMED TRACKS
1.Enter all tracks you want to program into memory following the procedures above.
2.Press the PLAY/PAUSE button. Disc play will start at the beginning of the first
programmed track. “PROG” indicator appears on the display.
TO CLEAR THE PROGRAM MEMORY
• Press PROGRAM/Clock-Display button to enter programming mode, then press the
 Stop button.
• The program memory will also be cleared if the disc compartment is opened, if the function is
changed, or if the power is turned “OFF”.
MUTE
• Press the MUTE button on the remote control to switch off the sound, the MUTE indicator will
appear.
• Press MUTE button again to restore the sound to the previous level.
STEREO HEADPHONE JACK
For private listening without disturbing others connect a set of stereo headphones (not included)
to the PHONES Jack on the front panel cabinet. The built-in speakers automatically shut off
when stereo headphones are connected to the headphone jack. When using stereo
headphones always start with the volume control set to a low level and gradually increase until
you find the desired level.
ESP:
It stands for Electrical Shock Protection.
In case of CD Mode, ESP function is already set on position.
ESP will work approx 10 second
By pushing the button of MODE/FIND, the display of ESP mark will disappear from LCD then
ESP is off position.
GB 71 GB 70
18.
ENTERING A PROGRAM
1.Press the PROGRAM/Clock-Dispaly button. “PROG” appears
and the following information will be display on the display:
2.Select the first desired track using the Forward and Reverse
 Skip Buttons.
3.Press the PROGRAM/Clock-Dispaly button. The first program
selection is now stored in the program memory. The display will
now show:
4.Select the next desired track using the Forward and
Reverse Skip Buttons.
5.Press the PROGRAM/Clock-Dispaly button. Continue entering tracks in this way until all the
desired tracks are stored (up to 64 tracks).
PROGRAMMED DISC PLAY (FOR MP3 ONLY)
• It is possible to program the tracks you wish to play in a sequence of your choice. It is not
possible to enter program a disc during playback. Press the Stop button first, then follow
the instructions below.
• It is easier to use the remote control for the following settings, however, you may also use the
controls on the main unit if desired.
ENTERING A PROGRAM
1.Press the PROGRAM/Clock-Display button. “PROG” appears and the following information
will be display on the display. The “album No” will flashing.
2.Select the first desired album using the Forward and
Reverse Skip Buttons.
3.Press the PROGRAM/Clock-Display button change to select the
first desired track using the Forward and Reverse Skip
Buttons.
4.Press the PROGRAM/Clock-Display button. The first program
selection is now stored in the program memory. The display will
now show.
5.Repeat Step 2-3.
6.Press the PROGRAM/Clock-Display button. Continue entering tracks in this way until all the
desired tracks are stored (up to 64 tracks).