Operation Manual

11
5.2 Seng an alarm
6
11
4
5
8
5 Cauon!Youcansetandacvatetwoalarms.
Alarm 1
• Settheapplianceinthestandbymode.
• KeepkeyALARM(5)pressedfor2seconds
"AL1"appearsonthedisplay.
• PressthePREV(6)orNEXT(11)keytosetthedesiredhour.
• PressALARM(5)toconrm.
• PressthePREV(6)orNEXT(11)keytosetthedesiredminutes.
• PressALARM(5)toconrm.
• Toselectthesourcemode(TUNER/CD/CARD/USB/BUZZ),pressthe
PREV(6)buonNEXT(11).
• PressALARM(5)toconrm.
5 WhenthesourcemodeCDhasbeenselected,aCDmustbeinthe
appliance.IfthereisnoCD,thealarmwillnotgoo.
5 WhenthesourcemodeUSBorCARDhasbeenselectedandthereis
noUSBormemorycardpresent,theradiomodewillbeswitchedon
whenthealarmgoeso.
Alarm 2
• Todothis,repeatthelast10steps.
Acvang the alarm 1
• PresstheALARMkeyonce(5).
Acvang the alarm 2
• PressthekeyALARM(5)twice,
• Pressthebuon3mestoswitchontwoalarms.
• Pressthebuononceagaintocancelthefuncon.