Operation Manual

ManualsBrandsAkai ManualsAudioAPRC90AT

APRC90AT manual

Table of contents

 1. Safety

o 1.1. Intended use

o 1.2. Labels in this manual

o 1.3. General safety instructions

 2. Preparations for use

o 2.1. Unpacking

o 2.2. Package contents

 3. Installation

o 3.1. Connecting to the mains

o 3.2. Install batteries

 4. Functions

o 4.1. APRC90AT

 5. Operation

o 5.1. Quick start

o 5.2. Radio functions

o 5.3. CD functions

o 5.4. USB functions

o 5.5. AUX IN

o 5.6. Auto Power System (APS)

 6. Cleaning and maintenance

o 6.1. Handle and care of a disc

 7. Technical data

 8. Disposal of used electrical and electronic equipment

Summary of content (17 pages)

PAGE 1
APRC90AT manual Table of contents  o o o  o o  o o  o  o o o o o o  o   1. Safety 1.1. Intended use 1.2. Labels in this manual 1.3. General safety instructions 2. Preparations for use 2.1. Unpacking 2.2. Package contents 3. Installation 3.1. Connecting to the mains 3.2. Install batteries 4. Functions 4.1. APRC90AT 5. Operation 5.1. Quick start 5.2. Radio functions 5.3. CD functions 5.4. USB functions 5.5. AUX IN 5.6. Auto Power System (APS) 6. Cleaning and maintenance 6.1.
PAGE 2
1.Safety 1.1. Intended use The device functions as a portable radio/CD audio player. The device can play music (MP3) via CD and USB. It is also possible to play music via the AUX port. Read the manual carefully before the first use. 1.2. Labels in this manual WARNING A warning means that injury or death is possible if the instructions are not obeyed. CAUTION A caution means that damage to the equipment is possible. A note gives additional information, e.g. for a procedure. 1.3.
PAGE 3
2.Preparations for use 2.1. Unpacking  Unpack the appliance carefully.   Check the package contents as described below. If any item is missing, please contact your reseller. Remove the labels from the front panel carefully if present. We recommend that you retain the original carton and packing materials in case it ever becomes necessary to return your product for service. This is the only way to safely protect the product against damage in transit.
PAGE 4
3.Installation   Put the appliance on a horizontal flat surface. Connect the appliance to the mains. CAUTION Do not put the appliance near a heat source. CAUTION Do not expose the appliance to direct sunlight. This appliance is equipped with rubber feet to prevent it from moving. The feet are made from non-migrating material specially formulated to avoid leaving any marks or stains on furniture.
PAGE 5
3.2. Install batteries The appliance can also be operated on battery power. For this purpose, the appliance uses six batteries (UM-1 / D). Please note: these batteries are not included.   Batteries are not necessary for normal operation. If you do not use the appliance for an extended period, remove the batteries. Install batteries    Remove the battery cover. Insert the batteries matching the (+) and (-) polarity markings. Re-install the battery cover.
PAGE 6
4.Functions 4.1. APRC90AT 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. FUNCTION switch (RADIO-CD/MP3-USB-AUX) Headphone jack USB slot VOLUME dial BASS button CD compartment POWER/STANDBY button TUNING dial AUX IN jack BAND switch (AM/FM/FM ST.
PAGE 7
5.Operation 5.1. Quick start General functions     To switch on the appliance, press the STANDBY button . To switch back to the standby mode, press the STANDBY button again. To select the source mode (RADIO-CD/MP3-USB-AUX), slide the FUNCTION switch ((1)) to the desired position. To adjust the volume level, turn the VOLUME dial (4) until the desired level is set. To enable the enhanced bass, press the BASS button (5). Press the button again to disable the enhanced bass.
PAGE 8
  To adjust the frequency, turn the TUNING knob (8) until the desired frequency is reached. For extended instructions, read the paragraph "Radio functions" further on in this manual. CD functions  To select the CD function, slide the FUNCTION switch (1) to the CD position. To insert a CD:     Press the CD compartment (6) to open the appliance Insert the CD with the label upwards Close the CD compartment To start playback, press the PLAY/PAUSE button (15) once.
PAGE 9
5.2. Radio functions     Slide out the antenna To select the radio function, slide the FUNCTION switch (1) to the radio position. Use the switch BAND (10) to switch between AM, FM and FM Stereo. To adjust the frequency, turn the TUNING knob (8) until the desired frequency is reached.
PAGE 10
5.3. CD functions To insert a CD:    Press the CD compartment (6) to open the appliance Insert the CD with the label upwards Close the CD compartment (6) Playing a CD:   To select the CD function, slide the FUNCTION switch (1) to the CD position. To start playback, press the PLAY/ PAUSE button (15) once. During playback, the following functions are available:       To select a track, press the PREV button (13) or the NEXT button (16) until the desired track is set.
PAGE 11
Using the REPEAT function     To repeat the current number, press the button PROG/REP (17) until the icon (A) appears on the display. To repeat all numbers, press the button PROG/REP (17) until the icon (B) appears on the display. (Only for MP3) To repeat all the numbers in one folder, press the button PROG/REP (17) until the icon (B) and the icon FOLDER appear on the display. To shut off the function REPEAT press the button PROG/REP (17) until no REPEAT icon is visible anymore.
PAGE 12
5.4. USB functions Due to the great variety of products with USB ports and their sometimes quite manufacturer-specific functions we can neither guarantee that all devices will be recognised, nor that all operating options that are possible in theory will actually work.  Insert the USB device in the slot USB (3). The device can only be connected one way. The USB input is located at the top of the appliance.  To select the USB function, slide the FUNCTION switch (1) to USB.
PAGE 13
Using the REPEAT function     To repeat the current number, press the button PROG/REP (17) until the icon (A) appears on the display. To repeat all numbers, press the button PROF/REP (17) until the icon (B) appears on the display. (Only for MP3) To repeat all the numbers in one folder, press the button PROF/REP (17) until the icon (B) and the icon FOLDER appear on the display. To shut off the function REPEAT press the button PROG/REP (17) until no REPEAT icon is visible anymore.
PAGE 14
5.5. AUX IN   To select the AUX function, slide the FUNCTION switch (1) to AUX. Connect the external appliance to your APRC90AT (9). AUX (11) appears on the display. 5.6. Auto Power System (APS) The Auto Power System (APS) is intended to save energy. In the following situations, the device will go into Standby mode after 15 minutes:    The FUNCTION (1) switch is in the CD/MP3 position and there is no CD in the CD compartment, or the CD has finished playing.
PAGE 15
6.Cleaning and maintenance WARNING Before performing any cleaning or maintenance, switch off and unplug the appliance. Clean the outside of the appliance with a soft cloth. When the appliance is very dirty, dampen the cloth slightly with water and a neutral solution. 6.1. Handle and care of a disc  Hold the disc with fingers. Hold the disc outer edge and/or the centre spindle hole. Do not touch the disc    surface. Do not bend or press the disc.
PAGE 16
7.Technical data Specifications Voltage: 230VAC / 50 Hz Speaker output: 4 x 6 Ohms 8 Watt (2 x 3 inch, 2 x 2 inch) 2 x 6 Ohms 5 W (2 x 1.
PAGE 17
8.Disposal of used electrical and electronic equipment The meaning of the symbol on the material, its accessory or packaging indicates that this product shall not be treated as household waste. Please, dispose of this equipment at your applicable collection point for the recycling of electrical and electronic equipments waste. In the European Union and Other European countries which there are separate collection systems for used electrical and electronic product.