Instruction manual

ENGLISH
Tape Recording
Recording to a cassette tape
When recording important selections, make a preliminary test to ensure that the desired
material is properly recorded.
AKAI is not liable for damage or loss of your recording arising from malfunction of this unit.
The volume and sound controls can be adjusted with no effect on the recorded signal
(Variable Sound Monitor).
When recording on a cassette tape, make sure that the eraseprevention tabs are not removed.
Cassettes have removable tabs that prevent accidental recording or erasing.
To protect the recorded sound, remove the tab after recording. Cover the tab hole with
adhesive tape to record on the tape without the tab.
Recording from the radio
oo
oooo
/
/
/
Note:
Play and record buttons will automatically released when the end of tape has been reached.
If a whistling noise occurs when recording from an FM or AM station, set the BEAT CANCEL switch
to 1 or 2, whichever gives the best reception.
PAUSESTOP/EJECTF.FWDREWINDPLAYRECORD
TAPE
Before recording:
Erase-prevention tab of cassette tapes:
For recording, use only normal tapes. Do not use metal or CrO tapes.
Side A
Tab for side B
Tab for side A
1 Set the FUNCTION switch to RADIO.
2 Set the BAND SELECTOR switch to FM or AM.
3 Tune in to the station to be recorded.
4 Load a blank cassette into the cassette compartment with
the side to be recorded on facing up.
5 Press the PAUSE
button.
6 Press the RECORD
button.
7 Press the PAUSE
button again to begin recording.
To stop recording:
Press the STOP/EJECT / button.
Beat cancel switch:
71
PAUSEPAUSESTOPSTOP/EJECTEJECTF.FWDF.FWDREWINDREWINDPLAYPLAYRECORDRECORD
EQ
ON/STAND-BY
EQ
ON/STAND-BY