PLL FM STEREO/ MW/ SW RECEIVER APW10 Operator's manual (GB) 1~17
ANTENNA LCD DISPLAY 0~9 NUMBER KEY POWER VOLUME LIGHT BAND SELECTOR FM SEARCH UP/ TIME + FM SEARCH DOWN/ TIME EARPHONE JACK MODE KEY EXTERNAL DC JACK AUTO SEARCH MEMORY METER BAND SLEEP ON/ OFF RESET INPUT/ LOCK KEY EXTERNAL ANTENNA JACK LONG/ SHORT RANGE SELECTOR BATTERY DOOR MEMORY/ TIME TONE SELECTOR ALARM/ SNOOZE SCRIPTION OF LCD DISPLAY 1. Frequency/ Time indication 2. Bass indication 3. FM Stereo indication 4. Signal intensity indication 5. Time alarm function indication 6.
USING EXTERNAL POWER SOURCE 1. Plug adapter (not included) into 220V DC power socket and turn on the adapter switch. 2. Connect adapter (not included) to the power jack of the unit. 3. Turn on the radio. Note: 1. When using external power with adapter (not included), battery power in the radio will be automatically cut off. 2. Prior to use of the adapter, please check the polarity of the external power source to avoid damaging the unit.
• If you cannot turn of the radio or have unstable volume during reception, you may have low battery. Turn the volume down or replace the batteries in that case. • In order to prevent losing saved data after turning off the radio, please replace the batteries in time. • Replacing Batteries 1. At turn-off state of the radio, replace the batteries as soon as possible. 2. Replace the batteries within 1 minute.
operation or at clock mode, you should replace the batteries at once to prevent battery leak. If the unit automatically turns off after turning it on, it means that battery is very low and you should replace batteries at once. When the radio automatically turns off due to very low battery, power indication will go up, but it does not mean that you have normal battery. Battery power should be judged according to power indication displayed when the radio is turned on. 2.
time of the unit is 0:00. If you short press mode key at turn-off state, you can switch to display of " " time, " " time and current time in turn; If you short press mode key at turn-on state, you can switch to display of current time, " " time, " " time and station frequency in turn. Adjusting Time 1. Switch the radio to time display mode. If the radio is currently at turn-on state, please turn off the radio first to get into time display mode. 2.
Tip: For operations of selecting and canceling time auto power-on functions, please refer to detailed description of time auto power-on operation on Page 10. 3. Sleep Auto Power-off Operation with time auto power-off function, you can set reception time of the radio with selection range from 10 minutes to 100 minutes. When reception time reaches preset time, the radio will automatically turn off to prevent the radio working on for a long time after you sleep wasting battery power. Steps: 1.
long pressing the key for 2 seconds, you can select or cancel Bass state and when you select Bass, " BASS " Stereo Stereo Bass sign will be displayed on the screen. BASS Special Note: You will have clearer sound effect if you turn off Bass while listening with the speaker.
Tips:- Auto search is suitable for searching stations with strong signals - In order to quickly locate stations with weak signals, you can make use of the advantages of auto search and manual search by reaching a station quickly with auto search first and then making fine tuning with manual search. - If the speed of digit change slows down on the screen during auto search, there may be a station with weak signal around and you can use manual search to search for the station with weak signal. 3.
5. Inputting Station Frequency If you remember the correct frequency of your desired station, you can receive the station by directly inputting the frequency of the station. a)Select desired band. b)Press Input/Lock key. Screen will be cleared and there is 8 seconds for you to input the frequency. c) Input the frequency correctly with number keys of 0~9. d)Press Input/ Lock key again to receive the station of the frequency. EXAMPLE OF INPUTTING STATION FREQUENCY 1. Inputting FM 104.
4. Inputting SW21.40MHz a)Select SW2 by short pressing Band after turning on the radio. b)Press Input/ Lock key for display as shown in the pictures on the left. c) Input 2.1.4.0 with number keys, press Input/ Lock key again after inputting the frequency and you can receive the station of SW21.40MHz.
SAVING STATIONS Address numbers of 0~9 of each band of ADT-S06 are used to save 10 stations that you constantly receive. 1. Search a desired station manually, automatically or directly inputting frequency. 2. Press Memory/ Clock key and MEMORY sign on the screen will start flickering. 3. Input address number with Flickering number key and the address number will be displayed at the bottom on the right of the screen. 4. Press Memory/ Clock key again to save the station and MEMORY sign will disappear.
clock digits are flickering or leave the digits flicker 5 times until the input time is automatically confirmed. SETTING TIME ALARM Repeatedly short press " Mode" key to get into " -Time Alarm" setting state and when " " sign flickers, short press Memory/ Clock key so that hour digit will flicker for 5 times. While hour digit flickers, directly input hour digit with 0~9 number keys or select hour digit by short pressing " + " or " - " key and then press Memory/ Clock key while hour digit is flickering.
close to each other (within 1 hour) and both are selected, when " " turns on the radio and when the radio is not turned off, " " will not start the alarm. In case " " time is set within 5 minutes after " " time and both are selected, if you press Alarm/ Snooze key when " " starts so as to get into snooze state, " " will be paused. When " " time arrives, it will exit from " " snooze state " " alarm will start. " sign and With repeated short press of Alarm.
" " sign disappears. b)If you want to cancel time auto power-off function at sleep time state, you can press Sleep key and the " " sign will disappear: Tips: 1. If you turn off the radio at sleep state, sleep time function will be automatically cancelled. 2. If you want to reset auto power-off time during radio reception, please cancel time auto power-off function as shown above and then reset sleep time auto power-off time.
the chip inside may get into a dead cycle state and cannot respond to external command. 1. When the radio has no key response without lock sign of " " displayed on the screen, or there is no display at all on the screen, the radio may be at dead state. In this case, you can push the Reset key with pen point or similar object to reset the radio. 2.
USING SUPPORTER Fix the supporting piece on the wristband to the back of the radio case to support the radio and pull out the 360˚, antenna vertically to keep the best position of the speaker to you. USING ANTENNA 1. Listening to MW Broadcasting Built-in magnetic antenna is adopted for reception of MW broadcasting. As the antenna is directional, you should change the direction of the radio until you have the best effect. 2.
ROUTINE PROTECTION OF RADIO 1. To keep good performance of the radio, please avoid placing or using the unit in the following places: - Bathrooms or other damp places. - Under strong sunshine or close to heat generating equipment. - Dusty places. 2. Avoid dropping or bumping into the radio when using it. 3.
NL Disposal of Used Electrical & Electronic Equipment The meaning of the symbol on the product, its accessory or packaging indicates that this product shall not be treated as household waste. Please, dispose of this equipment at your applicable collection point for the recycling of electrical & electronic equipments waste. In the European Union and Other European countries which there are separate collection systems for used electrical and electronic product.