User manual
11
ARC220
● Switch on the appliance. The display shows the total number of tracks on
the CD for two seconds. After two seconds, the appliance returns to clock
display.
● If an MP3 disc is loaded, press the ALBUM- button (3) or ALBUM+ button
(4) to select a folder.
● To start playback, press the PLAY/PAUSE / USB/CD button (16) once.
During playback, the following functions are available:
● To select a track, press the SKIP BACKWARD/MINUTE button (13) or the
SKIP FORWARD/HOUR button (14) until the desired track is set.
● To search for a specic point on the disc, hold the SKIP BACKWARD/
MINUTE button (13) or the SKIP FORWARD/HOUR button (14) until the
point is reached and release the button.
● To pause playback, press the PLAY/PAUSE / USB/CD button (16) once;
to resume playback, press the button again.
● To stop playback, press the STOP button (15).
Using the REPEAT function
This function is available in PLAY and STOP mode.
● Press the REPEAT button (12) once to repeat the current track.
The repeat indicator (25) ashes.
● Press the button twice to repeat all tracks on the CD.
The repeat indicator (25) is ON.
● Press the button three times to cancel the function.
The repeat function is now off.
Using the PROGRAM function
To use the PROGRAM function for CD, the playback must be in STOP mode.
● To play a list of tracks (max. 20) in a program, press the
CLOCK ADJ/PROGRAM button (11).
● Press the SKIP BACKWARD/MINUTE button (13) or the
SKIP FORWARD/HOUR button (14) to select a desired track.
● If an MP3 disc is loaded, press the ALBUM- button (3) or ALBUM+ button
(4) to select a folder.
● Press the CLOCK ADJ/PROGRAM button (11) to conrm the selection.
Repeat the previous step to select more tracks and conrm every
selection with the CLOCK ADJ/PROGRAM button (11).
● Press the PLAY/PAUSE / USB/CD button (16) to start the program.