User manual
9
ARC220
● To switch the clock setting between 12H mode and 24H mode, hold the
CLOCK ADJ/PROGRAM button (11) for two seconds.
● To set the correct hour, press the SKIP FORWARD/HOUR button (14).
● To set the correct minutes, press the SKIP BACKWARD/MINUTE button (13).
● To conrm the setting, press the CLOCK ADJ/PROGRAM button (11).
i
● To set the time, the appliance must be switched off.
● During a power failure, or when unplugging the appliance, the time
settings are lost, unless backup batteries are installed.
Clock functions5.2
Setting the SLEEP function
● Select the desired radio station or insert a CD.
● Press the SLEEP button (2). The SLEEP indicator (23) is ON.
● To adjust the sleep time, press the SLEEP button (2) until the desired
period is set (90/60/30/15 minutes). The appliance stops playing after the
chosen time has elapsed.
● To cancel the SLEEP function, press the SLEEP button (2) again.
Setting the alarm time
Two time slots are available (ALARM1 and ALARM2).
● Switch off the appliance.
● For AM/FM alarm, tune to the desired radio station
● Select the required time slot:
To select ALARM1, press the corresponding button (5). The alarm •
indicator (21) appears on the display.
To select ALARM2, press the corresponding button (6). The alarm •
indicator (22) appears on the display.
● Press the SKIP FORWARD/HOUR button (14) to set the hour, and press
the ALARM1 button (5) to conrm the setting. The ALARM1 indicator (21)
is ON.
● Press the SKIP BACKWARD/MINUTE button (13) to set the minutes.
● Press the alarm button again to conrm.