Operation Manual

Operation with BLUETOOTH
You can wirelessly connect loudspeakers to devices that have Bluetooth A2DP.
Preparation
Keep the key POWER pressed down until the device switches on with a beep.
You will see the blue LED flashing
Your ASB21I is now ready to establish a wireless connection with the your Bluetooth device.
Turn on the Bluetooth function of your device
Establishing a Bluetooth connection (PAIREN)
Go to the Bluetooth Menu of your Bluetooth device.
Search Bluetooth devices and select "AKAI ASB12" to establish connection
Enter "0000" when the player asks for the PIN code
The blue LED will flash slowly as soon as the connection has been established
NOTE: your Bluetooth connection has a range of approximately 9 metres
Reconnect via Bluetooth
If you move outside the Bluetooth range, the connection will be automatically terminated.
Establish the connection again by following the steps described above.
If you have previously established a connection with the same device, you no longer need to enter a PIN code.
Connect to another Bluetooth device
End the existing Bluetooth connection with the connected device.
For this, go to the Bluetooth menu of your Bluetooth device
Follow the steps described above to establish a new connection.