ASB220I Manual Index 1. Intended use 2. Safety 3. Preparations for use 4. Installation 5. Functions 6. Operation 7. Cleaning and maintenance 8. Technical data 9.
Intended use The iPod Music System functions as a docking station to play music from an iPod/ iPhone/ iPad. The appliance also plays music from an external device and from radio. Read the manual carefully before the first use. Safety Labels in this manual WARNING A warning means that injury or death is possible if the instructions are not obeyed. CAUTION A caution means that damage to the equipment is possible. A note gives additional information, e.g. for a procedure.
General safety instructions WARNING Do not put force on the appliance. The appliance can fall and can cause serious injury. CAUTION Do not spill any liquid on the appliance. WARNING Do not insert any objects in the ventilation holes. CAUTION Do not block the ventilation holes. This appliance is double insulated; therefore no earth wire is required. Always check that the mains voltage corresponds to the voltage on the rating plate.
Preparations for use Unpacking Unpack the appliance carefully. Check the package contents as described below. If any item is missing, please contact your reseller. We recommend that you retain the original carton and packing materials in case it ever becomes necessary to return your product for service. This is the only way to safely protect the product against damage in transit. If you do dispose of the carton and the packing materials, please remember to recycle with due care to the environment.
Package contents The following items are included in the received package: ASB220I 1 Remote control 1 Quick start guide 1 RCA cable 1 Mains cable 1 Button cell (CR2025) NOTE: the button cell battery has already been inserted in your remote control If any item is missing, please contact your reseller.
Installation Put the appliance on a horizontal flat surface. Connect the random equipment to the appliance. Read the paragraph "Connecting random equipment". Connect the appliance to the mains. Read the paragraph "Remote control". CAUTION Do not put the appliance near a heat source. Do not expose the appliance to direct sunlight. This appliance is equipped with rubber feet to prevent it from moving.
Connecting random equipment AUX jack Aerial connection (FM radio)
Connecting to the mains Connect the female connector on the mains cable to the AC MAINS connection. Connect the mains plug to a wall socket.
Change the battery Push the battery forward through the hole at the rear of the remote control. Use a neelde for instance. Slide the battery in/ out of the batterycompartment. Please note: Insert 1 lithium battery, type CR2025 3V battery When inserting the battery observe the (+) and (-) polarity markings.
Functions Remote control 1. 2. 3. 4. 5. 6. 7. 8. 9. PLAY/ PAUSE/ PAIR button VOLUME- button PREVIOUS button POWER/ MUTE button SOURCE button SOUND EFFECT button VOLUME+ button NEXT button M/ CLOCK button General functions Press the VOL - button (2) or the VOL + button (7) to set the volume level (range 1 to 31).
Push the SOUND (6) Button to set the sound effect BASS1, 2 or 3. To mute or restore sound, press the MUTE button (4). Press the SOURCE Button (5) to choose one of the following functions; DOCK (iPad/ iPhone/ iPod), AUX 1, AUX 2, Tuner or Bluetooth (pair). ASB12I docking-station Top control panel 1. 2. 3. 4. 5. 6. 7. 8.
Operation All functions of the appliance are accessible using the remote control. All instructions refer to operation with the remote control, unless indicated otherwise. Turning the device on and off. Switch on (off) the ASB220I Remote control Use the POWER (4) key for this. iPad/ iPhone/ iPod dock Use the POWER (4) key for this.
Setting the clock Preparation The device has to be switched off. Setting the current time Press and hold the CLOCK button (9). The hour digits start flashing. Set the hour Press the SOURCE (5) Button or the SOUND (6) Button. Confirm hour To do this, press the CLOCK key (9). Set the minutes Press the SOURCE (5) Button or the SOUND (6) Button.
Confirm minutes To do this, press the CLOCK key (9). Docking and charging the iDevice Push down the OPEN area at the rotating disk.
Audio playback Preparation Press the SOURCE button (5) (AUX 1, AUX 2, DOCK). Select the desired source (DOCK). Place your iPad/ iPhone/ iPod See for instructions section "Docking and charging the iDevice" Usage To start playback, press the PLAY/ PAUSE/ PAIR button (1) once. Press the PLAY/ PAUSE/ PAIR button (1) again to pause playback. Press the PREVIOUS button (3) or the NEXT button (8) to select the previous or the next track.
Press the SOURCE (5) button or the SOUND EFFECT (6) button to select the desired file. To start playback, press the PLAY/ PAUSE/ PAIR button (1) once. Operation with BLUETOOTH You can wirelessly connect the ASB220I to devices that have Bluetooth A2DP. We can not guarantee that all Bluetooth devices are compatible. Preparation Turn on the Bluetooth function of your device Establishing a Bluetooth connection (PAIREN) Press the SOURCE button (5). Select the desired source (BLUT).
Go to the Bluetooth Menu of your Bluetooth device. Search Bluetooth devices and select "BLUEPORT" to establish connection Enter "0000" when the player asks for the PIN code NOTE: your Bluetooth connection has a range of approximately 9 metres If you move outside the Bluetooth range, the connection will be automatically terminated.
Using the radio Preparation Press the SOURCE button (5). Select the desired source (TUNER). Program radio stations automatically Keep key M/CLOCK (9) pressed for 2 seconds All available stations are now programmed. Press the PREVIOUS (3) Button or the NEXT (8) Button to select the desired station. Manually adjust the frequency Press and hold the PREVIOUS (3) Button or the NEXT (8) Button to find the desired frequency.
Cleaning and maintenance WARNING Before performing any cleaning or maintenance, switch off and unplug the appliance. Clean the outside of the appliance with a soft cloth. When the appliance is very dirty, dampen the cloth slightly with water and a neutral solution.
Technical data Voltage: 220-240VAC / 50-60 Hz Power consumption: 25W Standby power consumption: < 1W Max power: 25W x 2 + 50W Frequency response: 40Hz - 20kHz Impedance: 500 mV / 47kΩ Distortion: 1% (1kHz, 1W) Dimensions: Ø 288 x 1192 mm Remote control Dynamic range: 6m Battery size: Cr2025 Speaker system Front speakers Impedance: 3Ω Subwoofer Impedance: 6Ω Working environment Operating temperature: - 10 ~ +40 C(elsius) Relative humidity: 5% ~90% Suitable for the following Apple devices iPad/ iPhone/ iP
Disposal of used electrical and electronic equipment The meaning of the symbol on the material, its accessory or packaging indicates that this product shall not be treated as household waste. Please, dispose of this equipment at your applicable collection point for the recycling of electrical and electronic equipments waste. In the European Union and Other European countries which there are separate collection systems for used electrical and electronic product.