Operation Manual

GENERAL OPERATION

1. Press STANDBY once for power on.

2. Press MODE to enter the next mode as shown as follows (the factory default mode is FM.):

LINE Î AUX Î USB Î CARD Î OPT IN Î BT Î FM

3. Press STANDBY to power off.

FM RADIO OPERATION

TUNING THE FM RADIO

1. Power on the unit, switch to FM (RADIO) mode by pressing MODE button repeatedly.

2. Press the TUNING/SKIP/SEARCH buttons on the remote to fine tune radio station. Press and

hold the TUNING/SKIP/SEARCH buttons on the remote to auto search radio station forward

or backward respectively (When an available station will be found, the unit will broadcast it

immediately and the searching will be stopped). During auto searching, press the

TUNING/SKIP/SEARCH buttons on the remote to stop the searching.

3. At radio mode, it is possible to access the frequency via numeric buttons on the remote control.

For example, press buttons 8, 9 and 8 to get to 89.8 MHz.

STORING YOUR FAVORITE RADIO STATION

1. During playback, press the MEM button on the remote for storing the current station until a

memory cell number flashes on the screen.

2. Use the CH+ or CH- buttons on the remote to select the corresponding memory cell for storing

the station.

3. Confirm your selection by pressing the MEM button on the remote.

4. During radio playback, press the CH+ or CH- buttons on the remote repeatedly to recall the

stored stations.

USB & CARD READER OPERATION

USB & SD/MMC CARD PLAYBACK

1. Power on the unit, insert an USB or a SD/MMC card into their respective slot unit.

2. Press MODE button repeatedly to switch to USB or card mode. The playback will start

automatically from the first track.

3. Press the TUNING SKIP/SEARCH FORWARD button on the remote to skip to the next track;

press and hold to search through the track forward.

4. Press the TUNING SKIP/SEARCH BACKWARD button on the remote to skip to the previous

track; press and hold to search through the track backward.

5. Use the numeric buttons to select your desired track number and playback will start automatically.