Professional Belt Drive USB Turntable ATT05U GB 37 37-47
IMPORTANT SAFETY INSTRUCTIONS 1. Read Instructions – All the safety and operating instructions should be read before this product is operated. 2. Retain Instructions － The safety and operating instructions should be retained for future reference. 3. Heed Warnings － All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow Instructions － All operating and use instructions should be followed. 5.
IMPORTANT SAFETY INSTRUCTIONS DO NOT OPEN RISK OF ELECTRIC SHOCK CAUTION: To reduce the risk of electric shock, do not remove any cover. No user-serviceable parts inside. Refer servicing to qualified service personnel only. The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the use to the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
ASSEMBLY 1. Remove the main unit with the packing from the box and remove the packing. 2. Set the 45-rpm adaptor on the main unit. 3. Set the turntable platter onto the center spindle. 4. Set the slip mat on the platter. 5. Installation of cartridge: When installing a cartridge, refer to the operating instructions of that cartridge. During installation, attach the stylus protector to guard the stylus tip from damage. (a) Connect the lead wires to the cartridge terminals.
CONNECTIONS Before connecting the unit it is advised that you also consult your current equipment instruction manual. IMPORTANT: Be sure to turn off the equipment before you make changes to the different connections. 1. Connect the power cord to an AC outlet. 2. Connect the RCA cable to the PHONO input of your AMPLIFIER. Output terminals Amplifier(Receiver) L (White) L Channel R (Red) R Channel GND (Spade) GND NOTE: Be sure to connect the ground terminal firmly to the amplifier or receiver.
CHANGING THE SPEED As long as the pitch control is in center “detent” click position, the turntable is operated at selected speed. The speed can be increased or decreased by 10% by the pitch control. An incorrect adjustment done on purpose can also be used to have the turntable rotate extremely slow or fast. The strobe dots at the edge of the turntable are used for speed monitoring. MAINTENANCE Clean the stylus periodically with a soft brush to prevent the accumulation of dust.
CONTROLS OVERVIEW 4. Center Spindle This spindle holds the turntable PLATTER records stable and centered. 15. Tone Arm Clamp and Rest Use this rest to safely hold the tonearm in position during non use and transportation. 5. Strobe Indicators Pilot Lamp This is lamp specially designed to pulse a beam of light at the STROBE INDICATORS on the turntable PLATTER. This will give the illusion that indicators are not spinning at certain speeds. 16.
AUDACITY SOFTWARE OVERVIEW Audacity is free software, licensed under the GNU General Public License (GPL). More information as well as open source code can be found on the CD included or on the web at http://audacity.sourceforge.net/ * Please ensure you have installed the software before starting. Setting up your PC to work with Audacity 1. Connect an input source to the unit. 2. Connect the USB lead to your computer. 3. Install the Audacity recording software. 4. Open the Audacity program. 5.
AUDACITY SOFTWARE OVERVIEW Recording Albums with Audacity 1. Saving a project Audacity writes all the changed and recorded audio to a directory called Projectname_data, which is located right where you saved the project file itself. Thus, select Save project as from your Audacity File tab and choose a location and filename for your project. Please note that when you startup Audacity fresh, only the “Save As...” menu option is available. 2.
SPECIFICATION GENERAL Model: Dimensions: Weight: Power supply: Power consumption: Standard test condition: ATT05U Professional Belt Drive USB Turntable 450(W) x 350(D) x 145(H)mm 4.4Kgs Dual Voltage: AC 115V~60Hz/230V~50Hz, User Selectable 8W Ambient Temperature: 23 +/- 2 degC Relative Humidity: 65% +/- 5% NOTE: Measurements can be carried out between 5 degC to 35 degC and 45% to 85% relative humidity.
Disposal Disposal of Used Electrical & Electronic Equipment The meaning of the symbol on the product, its accessory or packaging indicates that this product shall not be treated as household waste. Please, dispose of this equipment at your applicable collection point for the recycling of electrical & electronic equipments waste. In the European Union and Other European countries which there are separate collection systems for used electrical and electronic product.
