AWS10 Manual o o o o o o o o o o o Index 1. Intended use 2. Safety 2.1. Labels in this manual 2.2. General safety instructions 3. Preparations for use 3.1. Unpacking 3.2. Package contents 4. Installation 4.1. Connections 4.2. Charge the battery 5. Functions 5.1. ASW10BK Bluetooth speaker 6. Operation 6.1. Turning the device on and off. 6.2. Operation with BLUETOOTH 6.3. AUX IN 6.4. USB connection to charge device 7. Cleaning and maintenance 8. Technical data 9.
1.Intended use The appliance works as a speaker/ amplifier. Via the bluetooth connection music can be played wirelessly. It is also possible to play music using the AUX connection. The appliance contains a built-in rechargeable battery and can charge external devices using the USB connection. Read the manual carefully before the first use. 2.Safety 2.1. Labels in this manual WARNING A warning means that injury or death is possible if the instructions are not obeyed.
.Preparations for use 3.1. Unpacking Unpack the appliance carefully. Check the package contents as described below. If any item is missing, please contact your reseller. We recommend that you retain the original carton and packing materials in case it ever becomes necessary to return your product for service. This is the only way to safely protect the product against damage in transit.
.Installation Put the appliance on a horizontal flat surface. Connect the random equipment to the appliance. Read the paragraph "Connecting external devices". Charge the rechargeable build in battery. See for instructions section 4.1 CAUTION Do not put the appliance near a heat source. Do not expose the appliance to direct sunlight. 4.1. Connections 1. USB input 2. AUX input 3. DC IN input For extended instructions, read the paragraph "Operation" further on in this manual.
4.2. Charge the battery Connect the appliance to the mains. WARNING Charge the battery for at least 4 hours. Red LED off: battery fully charged NOTE: The housing of the adapter may become warm during operation. This is normal. The red LED may flash when the AWS10 is switched on and is not connected to a power source. This indicates the battery needs to be recharged. For longer period of storage, we advice to recharge the battery at least once every two months.
5.Functions 5.1. ASW10BK Bluetooth speaker 1. POWER button 2. VOL- button 3. VOL+ button When audio is being played while using the AWS10: 1.
6.Operation 6.1. Turning the device on and off. Keep the POWER key pressed down to switch the appliance on / off. NOTE: The AWS10 will enter a power saving mode if no audio is being played for 30 minutes. Keep the POWER button pressed down for two seconds to exit the power saving mode.
6.2. Operation with BLUETOOTH You can wirelessly connect loudspeakers to devices that have Bluetooth A2DP. Preparation Make sure the AUX cable is removed from the AWS10. Otherwise the bluetooth connection will not be established. Keep the key POWER pressed down until the device switches on. You will see the blue LED flashing Your AWS10 is now ready to establish a wireless connection with your Bluetooth device.
Establishing a Bluetooth connection (PAIREN) Go to the Bluetooth Menu of your Bluetooth device. Search Bluetooth devices and select AWS10 to establish connection Enter "0000" when the player asks for the PIN code You will hear a beep. The blue LED remains lit as soon as the connection has been established. NOTE: your Bluetooth connection has a range of approximately 9 metres The AWS10 is capable of being paired with 8 external devices.
6.3. AUX IN Connect the external appliance to your AWS10. Use the supplied AUX cable. The AWS10 will automatically switch into AUX mode after inserting the AUX cable. 6.4. USB connection to charge device Connect the external appliance to your AWS10. Use an USB cable (not included). NOTE: An external device can only be charged when using the USB port. The maximum power output of the USB port is 500mA. If your device requires more power, it may not charge.
7.Cleaning and maintenance WARNING Before performing any cleaning or maintenance, switch off and unplug the appliance. Clean the outside of the appliance with a soft cloth. When the appliance is very dirty, dampen the cloth slightly with water and a neutral solution. For longer period of storage, we advice to recharge the battery at least once every two months. 8.Technical data General functions Power supply: Rechargeable build in battery Input: AC 100-240V ~ 50/60 Hz Output: 16V / 1,8A Max.
9.Disposal of used electrical and electronic equipment The meaning of the symbol on the material, its accessory or packaging indicates that this product shall not be treated as household waste. Please, dispose of this equipment at your applicable collection point for the recycling of electrical and electronic equipments waste. In the European Union and Other European countries which there are separate collection systems for used electrical and electronic product.