User Guide

DPS24 VERSION 1.60 ADDENDUM
Page 21
NEW DEFAULT MIXER SETTINGS FOR RESET MIXER
When using the RESET MIXER option upon creation of a New Project or in the MIX SCENE
RECALL pop-up, the default settings have been changed as follows:
* Faders / Mute:
- INPUTS: 0dB, CH ON
- TRACKS: 0dB, CH ON
- GROUPS: 0dB, CH ON
- FX RETURNS: 0dB, CH ON
- FX/AUX SENDS: 0dB, CH ON
- AUX IN: -120dB, CH ON
- MASTER: 0dB
* Pan:
- All Pan centered
* All Mono Channels (INPUTS and TRACKS):
- EQ ON, FLAT EQ
- DYN OFF
- SENDS 1-4: GLOB, POST, -120dB
* FX RTN Channels:
- SENDS 1-4: OFF, POST, -120dB)
* L/R ASSIGN:
- TRACKS and FX RTNS: L/R
- INPUTS and GROUPS: "---" (not assigned)
* GROUP ASSIGN: all signals "---" (not assigned)
* FX/AUX SETUP:
- 4 x MONO
- FX 1-4
* MIDI CHANNELS:
- Fader: OFF, Controller 007, default value=104
- Pan: OFF, Controller 010, default value=64
* FX:
- MBCX: OFF
- FX1: ON, Big Hall - FX2: ON, Stereo Delay
- FX3: ON, Stereo Chorus - FX4: ON, Pan Phaser
* INPUT ROUTING:
- INPUT SOURCES: ADC 1-12
- FX RTN SOURCES: FX 1-4 L+R
The following routings are not affected during SCENE RECALL / MIXER RESET,
They are only reassigned upon creation of a NEW project with MIXER RESET.
* DISK RECORD SOURCES: GRP1-8 ("Inputs > Tracks via Groups" Default preset)
* OUTPUT ROUTING:
- STEREO OUTPUTS: ST L/R
- AUX OUTPUTS: AUXS 1-4
- DIGITAL OUTPUTS: ST L/R
- ADAT OUTPUTS: "---"