User Guide

16
Specifications and design are subject to change without prior notice.
Initial settings and specifications
Electronical parameters
Carton size
Weight
N.W. : 2.8 kg G.W. : 3.4 kg
8.0m
Other specifications
Accessories
Dimensions
Remote control distance
430(L) X 255(W) X 50(H) mm
485(L) X 108(W) X 345(H) mm
Digital audio output
Laser
Power source
Power consumption
Signal system
ItemItem
PAL/NTSC
Wave length: 655nm ; Laser power: class 1
<35W
Standard requirementStandard requirement
AC 230V~, 50Hz/60Hz
Output
Audio
characteristics
Audio
Video
S-video
Frequency
response
S/N ratio
Dynamic range
Total harmonic
distortion
SCART
Output level: 1 Vp-p(75W); connector: pin jack(1 systems)
Y output level: 1Vp-p(75W); C output level: 0.300Vp-p(75
W)(PAL), 0.286Vp-p(75W)(NTSC); connector: S-terminal
Output level: 2Vrm(1KHz, 0 dB); connector: pin jack.
2 channels output.
21 Pin Scart
OLD PASSWORD: Enter the OLD password. (Factory setting is
1369)
NEW PASSWORD: Enter the NEW password. Enter 4 digits from
the remote control unit numeric buttons.
CONFIRM PASSWORD: Confirm the NEW password by entering
it again. If the confirmation is incorrect, the Password Change
Page will be displayed again.
Password change page
OLD PASSWORD [ XXXX ]
NEW PASSWORD [ YYYY ]
CONFIRM PASSWORD [ YYYY ]
PASSWORD CHANGE PAGE
OK
Optical digital output: optical connector;
Coaxial digital output: pin jack;
Output
PHONES
Stereo,
Handset x 1 Video cord x 1
Battery x 2 (AAA, R03, UM-4 type) Audio cord x 1