User Guide

E - 11
Notes:
• If the external equipment is a television and this audio system is close to it, you may experience interference if
the tuner function is selected while the television is working.
• When you have selected TUNER function, sound will ONLY come from the front left, right speakers and subwoofer.
• Ensure that a VCR connected to this Unit is set to stereo mode otherwise the activated speakers may be
different from those outlined in the table on page 15.
• Due to copyright protection, DVD movies cannot be copied. If you copy a DVD movie onto a videotape, the
resulting copy will be unclear, with poor sound quality. This is NOT caused by a defective DVD system.
• When playing VCR, press the FUNCTION button on the remote control or front panel to AV_IN mode, all
speakers will be activated a few minutes later.
C. Connecting an other audio equipment
Using the supplied Audio/Video cable, connect ONLY the left and right AUDIO OUT jack on your Unit to the
AUDIO IN jack or use a coaxial digital Audio cable (not supplied) to connect to the coaxial in jack on your another
equipment. Do not connect the yellow video plug.
1.Turn on the Unit.
2.Turn on your audio equipment and follow the instructions included with it to select the AUDIO IN or DIGITAL IN
function.
Listening to an other audio equipment
Analogue connection
Setup
(continued to next page)(continued to next page)
(continued to next page)(continued to next page)
(continued to next page)
Digital connection
DVD Unit
AUDIO IN
To AUDIO IN
(white)
(red)
(yellow)
To AUDIO OUT
(white)(red)(yellow)
Amplifier of stereo
system, etc. (not included)
DVD Unit
COAXIAL
Audio equipment with
digital audio input jack