User Guide

E - 5
Rear Panel
1) Disc tray
Open or close tray by pushing OPEN/CLOSE button.
Place a disc on the disc tray, label side up.
2)
standby indicator
When the Unit is turned on by pressing the POWER/
STANDBY button, the light will illuminate a few
seconds. If you press POWER button on the
Remote control. The Unit will turn off and go to
standby mode. The light will continue to illuminate.
3) 3 STEREO indicator
When 3 STEREO sound selected in AV_IN mode,
the light will illuminate.
4) PRO LOGIC indicator
When PRO LOGIC sound selected in AV_IN
mode, the light will illuminate.
5) Display window
Display system information.
6) VOLUME control
Change the loudness of the sound from the speakers
connected to the Unit.
7) Remote sensor
Accept the remote control unit signals.
15) FM ANTENNA jack
16) S-VIDEO (DVD) output jack
17) VIDEO OUT jack
18) SCART socket
19) AUDIO IN (L/R) jacks
20) Front speaker (R) terminals
21) Center speaker terminals
22) Front speaker (L) terminals
23) AM LOOP ANTENNA terminal
24) DIGITAL AUDIO OUT jack
25) AUDIO OUT (L/R) jacks
26) VIDEO IN (VCR) jack
27) REAR speaker (R) terminals
28) SUBWOOFER terminals
29) REAR speaker (L) terminals
30) Power cord
Front Panel
8) FUNCTION button
Select the source.
9)
STOP button
Stop playing a disc.
10) PAUSE button
Press to pause playback. Each time you press the
PAUSE button the picture advances one frame.
Press the PLAY button to resume.
11) PLAY button
Press to start or resume playback
12)
SKIP buttons
Press SKIP
button to go back to previous chapters/
tracks.
Press SKIP button to advance to chapters / tracks.
Press and hold SKIP button to begin fast scan.
Four speeds are available.
Scan all available radio stations.
13) OPEN/CLOSE button
Use to open and close the disc tray.
14) POWER/STANDBY button
Turn the power on or off.
PARTS AND FUNCTIONS
(Continued on next page)(Continued on next page)
(Continued on next page)(Continued on next page)
(Continued on next page)
Note:
Screen saver - If no button is pressed within 3 minutes, the function will active, If you want to return the normal screen,
press any button.
123456
7814
910111213