Safety Guidelines Caution: Always use a power cable is properly grounded. Please use the AC cords listed below for each area: USA ...................... UL Canada ................ CSA/cUL FCC Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
IMPORTANT SAFEGUARDS Important Safeguards Before using your TV, please read these instructions completely, and keep this manual for future reference. Carefully observe and comply with all warnings, cautions and instructions placed on the unit or described in the operating instructions or service manual. The User Manual uses the following symbols to ensure a safe operation and prevent any damage to operators or properties: WARNING ----- Ignorance or inappropriate use may cause damage to the product.
Never use a damaged power cord: Heavy objects, heat, or tensile force may damage the power cord and cause fire or electric shock. Never block or cover the slots or openings in the TV cabinet back, bottom, and sides. Never place the TV: - on a bed, sofa, rug, or similar surface; - too close to drapes, curtains, or walls; or - in a confined space such as bookcase, built-in cabinet, or any other place with poor ventilation.
IMPORTANT SAFEGUARDS The power cable should be kept away from heat sources: The heat produced by any heat source may melt the covering of the power cable. Unplug the connector Hold the power connector when removing the power cable: Pulling the power cable itself may damage the wires inside the cable and cause fire or electric shock. Do not touch the connector with wet hands: To avoid risk of electric shock.
Notes others ▪ The LCD panel on this TV is manufactured using an extremely high level of precision technology; however, an occasional pixel (dot of light) may display constantly on the screen. This is a structural property of LCD technology and is not a sign of malfunction. Such pixels are not visible when the picture is viewed from a normal viewing distance. ▪ LCD (Liquid Crystal Display) may cause interference in image, sound, etc.
IMPORTANT SAFEGUARDS CONTENTS Notes on region numbers This DVD player is designed and manufactured for playback of region “1” encoded DVD software. The region code on the labels of some DVD discs indicates which type of player can play those discs. This unit can play only DVD discs labeled “1” or “ALL”. If you try to play any other discs, the message “Check Regional Code” will appear on the TV screen. Some DVD discs may not have a region code label even though their playback is prohibited by area limits.
Contents Safety Guidelines .........................................1 Important Safeguards ..................................2 1. Before use ...............................................8 2. Product Features ......................................8 Open the Package ......................................... 8 Installation .................................................... 8 3. Names and Functions of Parts...................9 Side View ...................................................... 9 Front View ..
BEFORE USE PRODUCT FEATURES SIDE VIEW 1. Before use The product is a 27” WXGA (WXGA resolution) LCD TV/DVD Player Combo. It has passed the UL and cUL safety certifications, and is an ideal product for personal and commercial use. The product is a precise electronic product. Users should read the following instructions carefully to maximize the performance and life span of the product: Open the Package - The product is packaged in a carton together with other standard accessories.
3. Names and Functions of Parts Side View The functions of the buttons are described as follows: (Eject): Press to open or close the disc tray. Sketch map (Stop): Press to stop playing the disc. (Play/Pause): Press to play or pause the disc. STANDBY: Press (Standby) to turn on and turn off. VOL.+/A. They are used as ＜ / ＞ buttons in the OSD Menu screen. B. Press to adjust the volume. CH.+/A. They are used as ∧ / ∨ buttons in the OSD Menu screen. B. Press to scan through channels.
REAR VIEW REMOTE CONTROL Rear View Sketch map Push the power switch (O: Off, I: On). Use the power cord connect to an earthed 120V, 60Hz AC outlet. Signal input and other terminals: . Coaxial Out: Connect to a digital audio component. . RS-232: The D-SUB 9 pins terminal is used as a control port for serial communication between PC and Panel. (For after sales service use only.) . D-SUB(VGA) In: For PC display purpose. Connects to the Mini D-Sub 15 pins analog output connector of the PC display card. .
Remote Control Power ( ): Press to turn on and off. Mute ( ): Press to mute the sound. Press again or press ∧, ∨ to restore the sound. CCD: Press to select the Closed Caption mode. V-CHIP: Press to select the child protect mode. MTS: Press repeatedly to cycle through the Multichannel TV sound (MTS) options: Mono, Stereo and SAP (Second Audio Program). Favorite: Press repeatedly to cycle through the favorite channel list. PIC.
REMOTE CONTROL Menu: Press to enter on-screen setup menu, press again to exit. , : Press to skip the forward or backward. : Press to play or pause the DVD disc. : Press to stop playing the disc. , : Press to search the forward or backward. : Press to open or close the disc tray. DVD Menu: Press to return DVD disc menu. Prog: Press to display the program menu. Press it again to exit. Repeat: Press repeatedly to cycle through the options: CHAPTER, TITLE, ALL and nothing.
Care For Remote Control - Avoid spilling liquids on the remote. Avoid dropping or otherwise jarring the remote. Always store the remote control at dry and normal room temperature place. If the remote is nor performing satisfactorily, replace the batteries. The batteries should be replaced after one year. - If the remote control will be idled for a long time (above 1 month) take out the batteries to avoid leakage from the batteries.
CONNECT ACCESSORY DEVICES Connecting the Computer Switch off LCD TV and external equipment before connecting cables. 1. Connect a computer’s VGA Out to the LCD TV’s VGA In terminal. 2. Connect a computer’s Audio Out to the LCD TV’s Audio In terminal. 3. Press Power to turn on the LCD TV. Turn on external equipment also. 4. Press Source to select VGA signal source. Connecting the DVD or VCR player devices Switch off TV and external equipment before connecting cables. 1.
Connecting AUDIO OUTPUT jacks to a stereo amplifier Switch off TV and external equipment before connecting cables. 1. Connect the TV Audio Output (R/L) to the stereo amplifier In (R/L). 2. Press Power to turn on the TV. Turn on external equipment also. White Red Stereo Amplifier Insert the Disc to slot-in DVD Player 1. 2. Disc’s screen side Press Source button to select DVD signal source. Insert your chosen disc into the disc slot on the side panel. Be sure to face the top of the disc (with title etc.
BASIC OPERATION OSD OPTION ADJUSTMENT 5. Basic Operation Power ON/OFF The Display is in Standby mode. on the remote control or on the - Press the Power control panel to turn on the unit. The power indicator changes from red to green. on the remote control or on the - Press the Power control panel again to return the display to standby mode. The power indicator changes from green to red.
Erase current channel from the list of favorite if a broken heart shape mark Note: displaying. - If you don’t want do add/erase this channel to/from the list of favorite, press this button again. - For addition, it will be put at last of the favorite list and the first channel in favorite list will overflow in case of the list is full.
TV OPERATIONS ---- VIDEO MENU TV Operations ◆ Using the Video Menu Note: Video Menu is just for TV, AV, S-Video, Component, DVD input source mode. It is not available in other input source mode. When smart picture mode is pre-set, the value of the above settings will be different according to different input source. ■ Adjustment of “Contrast” Press Menu button on the remote control, and then press ＜ or ＞ until the “Video” menu appears. Press ∧ or ∨ button to highlight the item.
■ Adjustment of “Saturation” Press Menu button, and then press ＜ or ＞ button until the “Video” menu appears. Press ∧ or ∨ button to highlight the item. Press Enter button to confirm and display a status bar as below. Press ＜ button to decrease. Press ＞ button to increase that will make color more intensive. Press Enter button to confirm the adjustment and return. ■ Adjustment of “Hue” Press Menu button, and then press ＜ or ＞ button until the “Video” menu appears. Press ∧ or ∨ button to highlight the item.
TV OPERATIONS ---- VIDEO MENU ---- AUDIO MENU Press ＜ button to decrease. Press ＞ button to increase. Press Enter button to confirm the adjustment and return. Note: This is a feature just used for YPbPr input source. ■ Selection of “Color Temperature” Press Menu button, and then press ＜ or ＞ button until the “Video” menu appears. Press ∧ or ∨ button to highlight the item. Press Enter button to confirm. Press ∧ or ∨ button to select one of “Cool”, “Middle”, “Warm” or “User” for balance of whitening.
◆ Using the Audio Menu ■ Adjustment of “Bass” Press Menu button, and then press ＜ or ＞ button until the “Audio” menu appears. Press ∧ or ∨ button to highlight the item. Press Enter button to confirm and display a status bar as below. Press ＜ button to decrease the Bass sound. Press ＞ button to increase it. Press Enter button to confirm and return. ■ Adjustment of “Treble” Press Menu button, and then press ＜ or ＞ button until the “Audio” menu appears. Press ∧ or ∨ button to highlight the item.
TV OPERATIONS ---- AUDIO MENU ---- MISCELLANEOUS MENU ■ Selection of “Surround” Press Menu button, and then press ＜ or ＞ button until the “Audio” menu appears. Press ∧ or ∨ button to highlight the item. Press Enter button to confirm. Press ∧ or ∨ button to select “On” or “Off”. Press “Enter” to confirm your selection. Press ＜ button to return. ◆ Using the Miscellaneous Menu ■ Selection of “Language” Press Menu button, and then press ＜ or ＞ button until the “Misc” menu appears.
• To view text, highlight T1, T2, T3, or T4. World Weather New York London HongKong Note: A ▪ ▪ ▪ closed when when when Temp F 53 51 80 C 12 11 25 Current Weather Sunny Cloudy Clear Note: If text is not available in your area, a black rectangle may appear on-screen. If this happens, turn off the Closed Caption feature.
TV OPERATIONS ---- MISCELLANEOUS MENU If the input is invalid, a message will pop up as below; You can press Enter button to display “Input Your Password Please” menu again, then entering the PIN code, or press ∧ , ∨ , ＜ or ＞ button move cursor to “Cancel” and press Enter button to close up this menu. Using the “V-Chip Control” item When enter the “V-CHIP” menu, select “V-Chip Control”. Press ∧ or ∨ button to highlight the “V-Chip Control” item.
Using the “Block TV Rating” item From the “V-CHIP” menu, select “Block TV Rating”. Press ∧ or ∨ button to highlight the “Block TV Rating” item. Press Enter button to confirm. Press ∧ , ∨ , ＜ or ＞ button to select an item, then press Enter button to lock (display “ ”) or unlock (display “ ”). Press Menu button to exit the sub-menu.
TV OPERATIONS ---- MISCELLANEOUS MENU ■ Setting of “Parental” The TV programs and movies shown on TV are given a rating signal based on the following rating systems. To block programs you feel unsuitable for your children, you need to set the TV for the desired rating systems. The TV’s “Parental” control feature functions by receiving the rating signal from your local broadcasting station or cable service provider. Press Menu button, and then press ＜ or ＞ button until the “Misc” menu appears.
Table of Parental Setting Items Status Description Channel Lock All channels Use the CH +/- and Enter buttons to select the channel you desired to lock. Video Lock TV, AV, S-Video, Component, DVD, VGA Use ∧/∨ and Enter buttons to select the Video you desired to lock. Change Password Enter a new 4-digit code by using the number keys on the remote, and then confirm the new code by entering it a second time, You will get a confirmation message when your code has been successfully changed.
TV OPERATIONS ---- TV MENU ---- GEOMETRIC MENU ◆ Using the TV Menu Note: TV menu is only for TV input source mode, thus it is not available in other input source mode. The locked channel will be skipped during the searching. ■ Using the “Auto Search” Press Menu button, and then press ＜ or ＞ button until the “TV” menu appears. Press ∧ or ∨ button to highlight the item. Press Enter button to confirm. Press ＜ button to return.
cursor to “Cancel” and press Enter button for close this setting. Press ＜ button to return. Note: It will be invalid if the current source is not TV. Hot keys: You can also press CH.Edit button on the remote control. ■ Selecting Channel Press CH +/- button on the remote control to search the channels, the channel number will increase or decrease by 1 for each pressing excluding the skipped channels. Press number buttons 0~9 to select the corresponding channel content.
TV OPERATIONS ----GEOMETRIC MENU ■ Using “Brightness” Press Menu button, and then press ＜ or ＞ button until the “Geometric” menu appears. Press ∧ or ∨ button to highlight the item. Press Enter button to confirm and display a status bar as below. Press ＜ button to decrease. Press ＞ button to increase that will brighten the dark area for seeing the objects in shadowness more clear. Press Enter button to confirm the adjustment and return.
Press ＜ button to decrease and press ＞ button to increase it. Press Enter button to confirm and return. ■ Using “Manual Clock” Press Menu button, and then press ＜ or ＞ button until the “Geometric” menu appears. Press ∧ or ∨ button to highlight the item. Press Enter button to confirm and display a status bar as below. Press ＜ button to decrease the menu clock. Press ＞ button to increase it. Press Enter button to confirm and return.
DVD OPERATION AUDIO CD PLAYBACK OPTIONS DVD Operations - Basic Playback . Press the Power( ) button on the TV to turn the unit on. . Insert your chosen disc into the disc slot on the side panel. Be sure to face the top of the disc (with title etc.) toward the front of the screen.
- Selecting the disc menu . Press the DVD Menu button during playback. . Use the ∧,∨,＜,＞, or Enter button to select the desired menu option. - Repeat playback You can play a specific title, chapter, track, or segment repeatedly. Press the Repeat button during playback. Each time you press the Repeat button, the repeat mode changes as follows. • DVD: Chapter → Title → All → Repeat Off - Programmed Playback You can arrange the playback order of tracks on the disc. . Press the Prog.
DVD MENU OPTIONS 2x → 4x → 8x 16x → 32x. •REV( ): 2x → 4x → 8x → 16x → 32x. . Press the Play/Pause ( ) button to resume normal playback. •FWD( ): → - Repeat playback You can play a specific track repeatedly. Press the Repeat button during playback. Each time you press the Repeat button, the repeat mode changes as follows. • Track → All → Repeat Off DVD Menu options When in the DVD input, press Setup button, the DVD menu is displayed.
- Last Scene Memory This player memorizes last scene from the last disc that is viewed. The last scene remains in memory even if you remove the disc from the player or turn off the set. If you load a disc that has the scene memorized, the scene is automatically recalled. Note: This player does not memorize the scene of a disc if you switch off the player before commencing to play the disc. - Selection of Dynamic Press the Setup button and then use ∧, ∨ buttons to select DYNAMIC.
DVD MENU OPTIONS TECHNICAL SPECIFICATION - Disc menu language selection Select your preferred language for the disc menus and DVD messages. (The disc must contain the selected language.) Press the Setup button and then use ∧, ∨ buttons to select DISC MENU. Press the Enter or ＞ button and then the ∧, ∨ buttons to select your desired language. Press the Enter button. The menus and on-screen displays will appear in the selected language. Press the Setup button to exit this menu.
6. Technical Specification Product Model: LCT2701TD Screen Size: 27” diagonal Screen Area: 596.259mm(H) x 325.232mm(V) Aspect Ratio: 16:9 External Size: 698mm(W) x 513mm(H) x 99mm(D) (w/o Stand) 698mm(W) x 571mm(H) x 250mm(D) (with Stand) Net Weight: 13.9kg (with Stand) Resolution: 1366 (H) x 768 (V) pixels (Each pixel has R/G/B 3 color cells) Pixel Dot Pitch: 146.0µm(H) x 436.5µm(V) Color: 16.
SUPPORT THE SIGNAL MODE CLEAN AND SIMPLE TROUBLESHOOTING 8. Support the Signal Mode A. D-Sub Mode (VGA) Horizontal Frequency (KHz) Vertical Frequency (Hz) 31.50 60.00 37.86 72.81 35.16 56.25 37.90 60.32 46.90 75.00 48.08 72.19 48.40 60.00 Horizontal Frequency (KHz) Vertical Frequency (Hz) 480i 15.734 59.94 480p(720x480) 31.468 59.94 720p(1280x720) 45.00 60.00 1080i(1920x1080) 33.75 60.00 Resolution 640 x 480 800 x 600 1024 x 768 B.
SYMPTOMS POSSIBLE SOLUTIONS POWER TV/DVD does not operate. • Make sure the power cord is plugged in. • Try another Wall outlet. TV Broadcast reception • Station or Cable TV experiencing problems, tune to another station. Poor sound or No sound. • Check Volume adjustments. • Check for sources of possible interference. • Station or Cable TV experiencing problems, tune to another station. Poor picture or No picture. • Check antenna or Cable TV connections, reorient antenna.
CLEAN AND SIMPLE TROUBLESHOOTING Simple Troubleshooting (Continued) SYMPTOMS POSSIBLE SOLUTIONS DVD No sound. • The unit is set to Mute mode. Stopping playback, search, repeat play, or program play, etc. cannot be performed. • Some discs may not do some of the functions. Audio sound track and/or subtitle language is not changed when you play back a DVD. • Multilingual language is not recorded on the DVD disc. No subtitle. Angle cannot be changed.
