User guide
Table Of Contents
- warning_page.pdf
- MPC1000
- Table of contents
- Chapter 1 : Introduction
- Chapter 2 : Basic Operation
- Chapter 3 : Sequencer feature
- MAIN page
- Recording the performance
- Playing back a sequence
- Other useful features for recording sequences
- Detailed information on sequence feature
- Setting the length of a sequence
- Setting the time signature of the sequence
- Setting tempo
- Setting the loop for a sequence
- Changing the default settings
- Changing the sequence name
- Changing the default name for a sequence
- Copying a sequence
- Deleting a sequence
- Deleting all sequences
- Handling the duration (the length of a note) at the loop boundary
- Track features
- MIDI sequencer features
- Chapter 4 : Editing sequences
- Chapter 5 : Step editing
- Chapter 6 : Song mode
- Chapter 7 : Functions of a pad
- Chapter 8 : Q-Link slider
- Chapter 9 : Using the MPC1000 with external devices
- Chapter 10 : Recording a sample
- Chapter 11 : Editing a sample
- Chapter 12 : Program
- Creating a program
- Assigning/Reassigning samples to the pads
- Playing the sample while the pad is being hit
- Setting the volume and the tuning for a sample
- Changing the sample volume with velocity
- Playing several samples with one pad
- Switching between samples using velocity
- Setting the envelope for a pad
- The functions in the Program window
- Editing the sound of a sample
- Simulating the open/close hi-hat (setting the mute group)
- Setting the overlap of the sounds on the same pad (voice overlap)
- Delete all the unused samples at the same time (PURGE)
- Setting a MIDI note number to the pads
- Assigning MIDI note numbers to the pads (changing the default setting)
- Chapter 13 : Mixer
- Chapter 14 : Effect
- Chapter 15 : Save / Load
- Chapter 16 : Connecting the MPC1000 to your computer
- Chapter 17 : Other settings
- Appendix
MPC1000 v2 Operator’s Manual rev 1.0
103
Specifications
General
Display 240 x 64 dot graphic LCD w/back light
Memory card slot Compact Flash (The size of the compact flash card that MPC1000 can handle is from
32MB to 2GB)
Dimentions (W x H x D) 330 x 75.5 x 228.2(Max 234.6)
Weight 3.45kg
Power reqirement 19W
Sound generator
Sampling rate 44.1kHz
Memory capacity 16MB standard (11.5MB for sound memory), expandable to 128MB
Recording time 136sec. (16MB, MONO), 24m28sec. (128MB, MONO)
Memory expansion slot 1 x for optional EXM128
Data format 16-bit linear
Polyphony 32
Dynamic filtering 2 x 2-pole filter per voice
Filter type Low pass, Band pass, High pass
Preset sound memory 5MB
Number of programs 24
Effects
Effects 2 stereo effects and Master effect
Effect type Chorus, Flanger, Bit grunger, 4 band EQ, Compressor, Phase shifter, Tremolo, Flying
pan, Reverb, Delay
Master effect: 4 band EQ, Compressor
Sequencer
Maximum events 100,000 notes
Resolution 96 parts per 1/4-note
Sequences 99
Tracks per sequence 64
MIDI output channels 32 (16 channels x 2 outputs)
Song mode 20 songs, 250 steps per song
Drum pad 16 (velocity and pressure sensitive)
Drum pad banks 4
Sync mode MIDI clock
Inputs/Outputs
Record input (L and R) 1/4-inch stereo phone x 2, balanced -40dBu, input impedance 11k ohms;
Max. Input level +10dBu
Digital input RCA-pin x 1 S/PDIF
Stereo output (L and R) 1/4-inch phone x 2 unbalanced +11dBu, output impedance 1k Ohms,
Max. output level +17dBu
4 individual outputs 1/4-inch phone x 4 unbalanced +11dBu, output impedance 1k Ohms,
Max. output level +17dBu
Phones output 1/4-inch stereo phone x 1, 200mW / 100 ohms
Digital output RCA-pin x 1 S/PDIF
MIDI inputs 5-pin DIN x 2
MIDI outputs 5-pin DIN x 2
USB Slave connector x 1, USB MASS STORAGE CLASS support
(You need Windows 2000/Me/XP or later version, or MacOS 9.x/10.x or later version. )
Footswitches 1/4-inch phone x 2