Music production Center SERVICE MANUAL 1
SAFETY INSTRUCTIONS INFORMATIONS 1. Parts identified by the symbol are critical for safety. Replace them only with the parts number specified. 2. In addition to safety, other parts and assemblies are specified for conformance with such regulations as those applying to spurious radiation. These must also be replaced only with the specified replacements. Examples : Noise blocking capacitors, noise blocking filters, etc. 3. Use specified internal wiring.
I. SPECIFICATIONS General Display Memory card slot Dimentions (W x H x D) Weight Power reqirement 240 x 64 dot graphic LCD w/back light Compact Flash (The size of the compact flash card the MPC1000 can handle is from 32MB to 2GB) 330 x 75.5 x 228.2(Max 234.6) 3.45kg 19W Sound generator Sampling rate Memory capacity Recording time Memory expansion slot 44.1kHz 16MB standard (11.5MB for sound memory), expandable to 128MB 136sec. (16MB, MONO), 24m28sec.
Inputs / Outputs Record input (L and R) Digital input Stereo output (L and R) 4 individual outputs Phones output Digital output 1/4-inch stereo phone x 2, balanced -40dBu, input impedance 11k ohms; Max. Input level +10dBu RCA-pin x 1 S/PDIF 1/4-inch phone x 2 unbalanced +11dBu, output impedance 1k Ohms, Max. output level +17dBu 1/4-inch phone x 4 unbalanced +11dBu, output impedance 1k Ohms, Max.
II. DISASSEMBLY In case of trouble, etc., necessitating dismantling, please dismantle in the order shown in the illustrations. Reassemble in the reverse order.
III.
IV. SUPPLEMENTARY INFORMATION [Update procedure] ===How to copy the OS binary file to a CF card using a MPC1000 and a computer==== Below procedure will utilize the MPC1000 as a Compact flash writer. Required Equipment : Compact Flash (CF), Computer with USB mass storage class support (Windows XP/ME/2000 or Mac OSX, OS9.x) 1. Copy/Download the OS data to a computer ’s hard disc drive and extract it ’s data. 2. Insert a Compact Flash card into the MPC1000. 3. Turn on the power of the MPC1000. 4.
Starting Display MPC1000 TEST OS PANEL SERVICE MANUAL AUDIO MIDI- F.SW- ----- F3 F4 F5 F6 F2 MEMORY F1 (Foot SW status displayed) "F.SW1 : ON F.
V. PARTS LIST ATTENTION 1. When placing an order for parts, be sure to list the Part No., Model No. and the description of each part. Otherwise, the non-delivery of the part or the delivery of a wrong part may result. 2. Please make sure that Part No. is correct when ordering. If not, a part different from the one you ordered may be delivered. 3. Since the parts shown in Parts List or Preliminary Service Manual may have been the subject of changes, please use this Parts List for all future reference.
1. PC BOARD BLK Ref. No. Part No. 1 2 Description BA - L4033A020A PC(#) MAIN BLK MPC1000 BA - L4033A030A PC(#) OPERATION BLK MPC1000 PC(#) MAIN BLK CONSISTS OF FOLLOWING P.C. BOARDS. 1 BA - L4033A501A PC CPU BLK 2 BA - L4033A501B PC AD/DA BLK 3 BA - L4033A501C PC FRONT BLK 4 BA - L4033A501D PC HD CONNECT BLK 5 BA - L4033A501E PC FILTER BLK PC(#) OPERATION BLK CONSISTS OF FOLLOWING P.C. BOARDS.
7. PC OPERATION-R BLK 11. PC MIDI BLK Ref. No. Part No. Description Ref. No. Part No.
FINAL ASSEMBLY BLOCK SERVICE MANUAL 12
FINAL ASSEMBLY BLOCK SERVICE MANUAL 13
FINAL ASSEMBLY BLOCK 5 56 57 SERVICE MANUAL 14
4-7-3, KITA-YAMATA, TSYZUKI-KU, YOKOHAMA, JAPAN SERVICE SECT.
PC (#) OPERATION (OPERATION - F) FOOT SW HEAD PHONE PC (#)MAIN (FRONT)
TO : LCD TO : USB TO : MIDI BLK TO : DIGTAL BLK SOUND / WORK TO : AD / DA BLK TO : PAD BLK SOUND / WORK TO :HDD CONNECT BLK TO : FRONT BLK (CF) TO : OPERATION - R BLK
MPC1000 OPERATION-R BLK PAD BLK OPERATION-L BLK OPERATION-F BLK MIDI BLK SCHEMATIC DIAGRAM L4033A502A L4033A502B L4033A502C L4033A502D L4033A502E
MPC1000 CPU BLK SCHEMATIC DIAGRAM L4033A501A
MPC1000 CONNECTION DIAGRAM
MPC1000 AD/DA BLK SCHEMATIC DIAGRAM L4033A501B
