User Guide

Page 103
Chapter 6: Creating and Editing Programs
Setting the Filter
This edits the filter of the sound assigned to each note.
The filter has the following two parameters. Select the parameter
field you want to edit with the CURSOR key and set the value with
the DATA wheel.
• Freq:
This sets the cut off frequency of the filter. The smaller the value,
the more oblique the sound becomes.
• Reso:
This sets the resonance of the filter. The larger the value, the more
emphasized the boarder of the cut off frequency is, creating a
unique sound.
To display the following window, select the filter field and press the
OPEN WINDOW key.
To set the ration in which the filter changes according to the settings
of the filter envelope and velocity.
• Attack:
This sets the attack time of the filter envelope. The larger the
value, the more time it takes for the sound to clarify.
• Decay:
This sets the decay time of the filter envelope. The larger the value,
the softer the decay of the cut off frequency becomes.
• Amount:
This sets the depth of the filter envelope. The larger the value, the
larger the effect of the filter envelope becomes. The envelope is dis-
abled when it is set to 0.
• Velo>Freq:
This allows the velocity to control the filter. The larger the value, the
clearer the sound becomes when with the impact of the velocity. When
this is set to 0, the tone is the same regardless of the velocity impact.
• Velo:
This displays the velocity in real time when the DRUMS PAD is hit.