User Guide

Page 119
Chapter 8: Creating and Editing Sounds
During the recording, the following display will appear.
The sampling will end when the time set in Time: field is up. The
sampling will also end when STOP[F6] is pressed during a sampling.
The sampling will be interrupted when CANCEL[F5] is pressed and
will return to the original display.
The following window will be displayed when the sampling is fin-
ished.
To listen to the sampled sound, press PLAY[F4].
When RETRY[F2] is pressed, the sampled sound will be discarded
and the display will return to the original display.
First set the following fields before saving a sampled sound:
• Name for new sound:
This names the sampled sound.
Move the cursor with CURSOR LEFT or RIGHT key, or the DIGIT
wheel and enter the name with the DATA wheel. It is also possible
to directly enter the name from the DRUMS PAD. The letter shown
on the top right of the pad will be entered when PAD is pressed. For
example, A will be entered if you press PAD1 once and B if you press
it again. Use the 16 LEVELS key to enter a space. To switch be-
tween lower and upper case keys, press the PAD BANK key.
Enter a name and press the ENTER key to confirm.
Note:Note:
Note:Note:
Note: If you do not press the ENTER key and move the Default
Name: field or other pages with the CURSOR DOWN
key, the entered name will be ignored and the name will
not change.