User Guide

Page 120

Chapter 8: Creating and Editing Sounds

• Assign to note:

This assigns a sampled sound to DRUMS PAD. When the sampling

is complete, it is possible to play the sound which has just been re-

corded with the pad. Select a field with the CURSOR key and select

the note number of the DRUMS PAD you want to assign with the

DATA wheel. It is also possible to select the field with the CURSOR

key and directly assign the sound by hitting the DRUMS PAD. The

note number of the DRUMS PAD will appear and the currently as-

signed sound will play. When you do not want to assign a sound to

a pad, select --/OFF with the DATA wheel.

When KEEP[F5] is pressed, the sampled sound will be stored to the

memory and the display will return to the original display.

By pressing the OPEN WINDOW key when the sample mode screen

is displayed, the Sound memory window will appear regardless of the

cursor position.

The available sampling time of the total memory capacity is dis-

played.

CAUTION:CAUTION:

CAUTION:The RECORD IN jack on the rear panel are bal-

anced inputs having a hot, cold and ground con-

nection using a standard stereo phone jack:

Ground Cold Hot

Standard mono phone plugs can also be used for

sampling. The cold connection will simply con-

nect to ground.