User Guide

Page 121
Chapter 8: Creating and Editing Sounds
Editing a Sound
This allows you to edit a sound loaded from a disk or sampled and
loaded from the memory.
By pressing TRIM (or 5 on the numeric pad), the TRIM mode screen
appears.
Selecting a Sound
Move the cursor to the Snd: field and select the sound by rotating
the DATA wheel. In the case of stereo sampling, (ST) will appear
after the sample name.
Renaming or Displaying the Specification of the Sound
To open the Sound window, select the Snd: field and press the
OPEN WINDOW key.
• Sound name:
This changes the name of the sound.
Move the cursor with CURSOR LEFT or RIGHT key , or the DIGIT
wheel and enter the name with the DATA wheel. It is also possible
to directly enter the name from the DRUMS PAD. The letter shown
on the top right of the pad will be entered when PAD is pressed. For
example, A will be entered if you press PAD1 once and B if you press
it again. Use the 16 LEVELS key to enter a space. To switch be-
tween lower and upper case keys, press the PAD BANK key.
Enter a name and press the ENTER key to confirm.
Note:Note:
Note:Note:
Note: If you do not press the ENTER key and move the Default
Name: field or other pages with the CURSOR DOWN
key, the entered name will be ignored and the name will
not change.