User Guide

Page 148

Chapter 9: Disk Operation

Note:Note:

Note: When SCSI is selected in the

Device:

field, the

Part:

field appears on the screen.

Select the partition you want to load.

If you are using a disk with a large amount of disk space, such as a

hard disk, it is easier to manage the files by dividing the disk

space. Set the partitions after the disk has been formatted.

If you are loading CD-ROM data used for S1000 or S3000, the

Vol: field will appear on the right of the View: field.

The S1000 or S3000 disk is divided into partitions and then to

smaller units called volume. When you are selecting a file to load,

select a partition in the Part: field, a volume in the Vol: field,

and the sound in the File: field.

It is possible to select the file type you want to display in the

File: field of View: field. It is possible to select a specific ex-

tension in the View: field. This enables you to display only the

files with the extension selected in the View: field in the File:

field. This is convenient to find a file when there are many files on

a disk.

3. Select the file you want to load in the File: field. The procedures

differ slightly depending on the type of file selected.