User Guide

Page 149
Chapter 9: Disk Operation
4-1. Selecting .SND (sound) Files or .WAV (wave) Files
Press DO IT[F6] to load a sound file. The following window
appears when the loading is completed.
The file name of the loaded sound will appear in the File:
field.
Press PLAY[F3] to listen to the loaded sound.
Select the note number or drum pad you want to assign the
loaded sound to in the Assign to note: field. It is possible
to rotate the DATA wheel or select directly by playing the pad.
Select --/OFF by rotating the DATA wheel if you do not want to
assign the sound to a note number.
Press KEEP[F5] to assign the loaded sound to a drum pad.
If you do not wish to keep the loaded sound, press DISCARD[F4]
to discard the loaded data.
4-2. Loading .SEQ (sequence) or .MID (standard MIDI) Files
Press DO IT[F6] to load the file. The following window appears
when the loading is completed.
The file name of the loaded file will appear in the File: field.
Press PLAY[F3] to listen to the loaded file.
Select the sequence number to which you want to assign the se-
quence data to in the Load into: field.
Press KEEP[F5] to assign the loaded file to the sequence number.
If you do not wish to keep the loaded file, press DISCARD[F4] to
discard the loaded data.