User Guide

Page 170
Appendix
Model: MPC2000 (
sequencersequencer
sequencersequencer
sequencer section) MIDI Implementation Chart Version: 1.0
Function **** Transmitted Recognized Remarks
Basic Default 1 - 16 1 - 16
Channel Changed 1 - 16 1 - 16
Default 3 1
Mode Messages X X
Altered X X
Note 0 - 127 0 - 127
Number True Voice 0 - 127 0 - 127
Velocity Note ON O O
Note OFF O O
After Key’s O O
Touch Ch’s O O
Pitch Bender O O
Control 0 - 127 O O See note below
Change
Prog O O
Change True# 0 - 127 0 - 127
System Exclusive O O
System : Song Pos O O
: Song Sel X X
Common : Tune X X
System : Clock O O
Real Time : Commands O O
Aux : Local ON/OFF X X
Messages : All Notes Off O X
: Active Sense X X
: Reset X X
Note : If the Convert Sustain Pedal To Duration field (accessed by pressing the MIDI key and selecting option 2) is set to
ON, then incoming controller 64 messages (sustain pedal) will not be recorded into sequences. Instead, any notes
that are currently pressed when a Sustain On message is received are internally held on, even after they are
released, until a Sustain Off message is received. The result is that the individual durations of notes are length-
ened. This is explained further in the “MIDI Receive Channel, Local Mode, Soft Thru, Note Variation Controller
Assign and Sustain Pedal Processing” section of the manual, earlier in this chapter.
Mode 1 : OMNI ON, POLY Mode 2 : OMNI ON, MONO O : YES
Mode 3 : OMNI OFF, POLY Mode 4 : OMNI OFF, MONO X : NO