User Guide

Page 29
Chapter 3: Recording Sequences
6. Select the Loop: field with the CURSOR key and rotate the
DATA wheel to the left to set it OFF.
7. Select the Count: field with the CURSOR key and rotate the
DATA wheel to the right to turn it ON.
8. Select the Count: field and press the OPEN WINDOW key to
open the Count/Metronome window.
9. Select the Count in: field with the CURSOR key and select
REC ONLY with the DATA WHEEL. Furthermore, select the In
rec: field and rotate the DATA wheel to the right and set it to
YES.
10.Press CLOSE[F4], close the Count/Metronome window and return
to the main window.
11.Press the PLAY START key while holding down the REC key to
start recording. After one bar count, the bar.beat.tick numbers in
the Now: field will start to increase. Play the drum pads to the
click.
12.The recording will automatically stop when the number of bars set
in step 5 have been recorded. To stop in the middle of a recording,
press the STOP key. It is possible to play back the recorded se-
quence by pressing the PLAY START key.