User Guide

Page 65
Chapter 4: Editing Sequences
View: Open the Step Edit Option window by selecting a field and
pressing the OPEN WINDOW key.
• Auto step increment:
After entering data in step input, you can automatically move a se-
quence according to the value set in the Timing: field on the
main screen each time an event is entered from a pad or MIDI key-
board.
Setting this to YES will move the sequence according to the settings
in the Timing: field after the DRUMS PAD or MIDI keyboard
has been released (and the note off has been sent).
• Duration of recorded notes:
During the step input, this sets the duration of the entered note to
either the length of time the key is actually pressed or to a predeter-
mined length.
AS PLAYED The metronome will play from the moment
the DRUMS PAD or MIDI keyboard is
pressed until it is released.
TC VALUE: Regardless of the time that the key is actu-
ally pressed, the duration will be the value
set in the Timing: field. When TC
VALUE is selected, the percentage field will
also appear. The duration is set against the
Timing: field by percentage. For ex-
ample, if it is set to 50%, the duration is half
the amount set in the Timing: field and
the result will be a staccato sound.