User Guide

Page 72
Chapter 4: Editing Sequences
Copying by Bar
It is possible to bundle the data on all of the tracks in a sequence and
copy them by bar measures.
Press EDIT[F2] in the main screen and display the event copy screen
and press BARS[F2].
Set the range of bars to be the copy source in the left window and set
the insert destination in the right window.
Here, all of the tracks in a sequence will be copied and inserted to the
point set in the right window.
Left window
Sq:
This selects the sequence of the copy source. Here only the se-
quence number is displayed.
First bar:
This specifies the first bar of the copy source sequence.
Last bar:
This specifies the last bar of the sequence of the copy source.
Right Window
Sq:
This selects the sequence of the copy destination. Here only the
sequence number is displayed.
After bar:
Behind the bar set here, the data set in the left window is inserted
the number of times set in Copies:. Here, the data will not be
over written, but the inserted data will push back the initial data.
Copies:
This specifies the number of copies. The copy source data is re-
peated the number of times set here.