User Guide

Page 73
Chapter 4: Editing Sequences
The sequence of the copy source and the copy destination can be set at
the same time in the Copy Bars window.
When the Sq: field is selected with the cursor, press the OPEN WIN-
DOW key.
Select the sequence of the copy source on the top and select the copy
destination on the bottom. Here it is possible to view and select the
sequence name.
CAUTION:CAUTION:
CAUTION:CAUTION:
CAUTION:When you copy by bar, the data among corre-
sponding tracks will be copied. For example, the
data on track 1 will be copied to track 1 and track
2 to track 2 and so on.
Rearranging the tracks
This allows you to rearrange the tracks within a sequence.
In the main screen, press EDIT[F2] and display the Event Copy
screen and press trMOVE[F3].
Select the sequence in the Sq: field and move the cursor to the field
where the track is displayed using the CURSOR DOWN key. In doing
so, the cursor will select the track which displays a list in the middle
as shown below. Scroll the list with the DATA wheel, select the track
you want to rearrange, and press SELECT[F6].