User Guide

Saving and loading a sequence
41
A Disk information: Indicates the storage
device that you have selected for operations.
B Disk field: Selects the load-source storage
device.
C File list block: Displays the hierarchy of the
contents of the storage device you selected.
D View field: Selects the type of file that will be
displayed in the file list block.
E Wave free field: Indicates the amount of free
memory within the MPC4000’s sampler sec-
tion.
FSequence free field: Indicates the amount of
free memory within the MPC4000’s sequencer
section.
G CPU free field: Indicates the amount of free memory within the MPC4000’s data management area.
2. Move the cursor to the Disk field, and turn the [JOG] dial to access the Disk List popup window.
3. Move the cursor to the storage device from which you want to load data, and press the [F6] key
(SELECT).
The storage device at which the cursor is located will be selected as the load-source storage device.
4. Move the cursor to the View field, and turn the [JOG] dial to select the type of file that you want
to load.
When you use the View field to select the type of file that you want to load, all other files will be hidden.
5. Move the cursor to a file in the file list block.
Use the CURSOR [
√ ]/[ ® ] keys to move upward or downward between levels, and use the CURSOR
[
π ]/[ † ] keys to select a folder or file in the same level.
6. The following procedure will depend on the type of file you selected.
If loading a single sequence
• Press the [F6] key (DO IT) to access the Load a Sequence popup window.
• Move the cursor to the sequence list, and turn the [JOG] dial to select the sequence number into which
you will load the sequence.
A Sequence list: Selects the sequence number into which the sequence will be loaded.
If loading an ALL (all sequences + songs) file
Press the [F6] key (DO IT) to access the Load ALL (songs and sequences) File popup window. When you
load an ALL file, all sequence and song data in the memory of the MPC4000 will be overwritten. If internal
memory contains data that you want to keep, save it to a storage device beforehand.
If loading a specific single sequence from within an ALL file
• Press the [F6] key (DO IT), and then press the [F3] key (SEQ) to access the Load a Sequence popup window.
1
2
54 6 7
1