User Guide

Converting a song into a sequence
47
The Convert Song to Seq popup window will appear. This popup window lets you convert a song into a
sequence.
A From song field: Selects the song that will be
converted.
B To sequence field: Selects the destination
for the converted sequence.
C Track status field: Selects how settings will
be made for the tracks within the converted
sequence.
4. Make sure that the song you want to convert into a sequence is selected in the From song field.
If not, turn the [JOG] dial to select the desired song.
5. Move the cursor to the To sequence field, and turn the [JOG] dial to select the sequence that will
be the destination for the converted sequence.
When the popup window appears, the lowest-numbered empty sequence will automatically be selected.
6. Move the cursor to the Track status field, and turn the [JOG] dial to select one of the following
ways in which track settings will be made for the tracks of the converted sequence.
• REFERENCED TO 1ST SQ
The song will be converted into a sequence according to the track parameters and tempo of the sequence
that is selected in the first step. Muted tracks will also be converted without change.
• OFF TRACKS IGNORED
With the exception that currently-muted tracks will not be converted, this is the same as REFERENCED TO
1ST SQ.
• MERGED ON MIDI CHANNEL
With the exception that tracks set to the same MIDI channel in each sequence will be combined into one
track, this is the same as REFERENCED TO 1ST SQ.
7. To execute the conversion, press the [F6] key (DO IT).
When the conversion is finished, the window will close automatically.
Note: If a sequence that already contains events is selected as the destination sequence, that sequence will be
overwritten when you execute the Convert command. Be careful not to erase an important sequence by mistake.
Note: It will not be possible to execute the song conversion if the result would contain more than 50,000 note
events.
1
2
3