User Guide

Chapter 5—Using multis and parts

2. Move the cursor to the Disk field, and turn the [JOG] dial to display the Disk List popup window.

3. Move the cursor to the storage device from which you want to load data, and press the [F5] key

(SELECT).

The storage device at the cursor will be selected as the loading-source.

4. Move the cursor to the View field, and turn the [JOG] dial to select the type of file that you want

to load.

By selecting the desired type of ﬁle in the View ﬁeld, you can hide all other types of ﬁles.

5. In the file list block, move the cursor to the file that you want to load.

Use the CURSOR [

√

]/[

] keys to move upward or downward between levels, and use the CURSOR

[

]/[

†

] keys to select a folder within the same level.

6. Press the [F6] key (DO IT).

The Load a Multi popup window will appear.

A Load ﬁeld: Specify how the programs/sam-

ples included in the multi will be handled.

B Replace same ﬁle in memory ﬁeld: Spec-

ify what will happen if internal memory

already contains a program/sample of the

same name as a program/sample that is being

loaded. (This will be displayed only if you

have selected a choice other than MULTI

ONLY in

1, above.)

C [F1] key (CANCEL): Cancels the load operation and closes the popup window.

D [F3] key (CLEAR): Clears the internal memory.

E [F5] key (DO IT): Executes the load operation.

7. Move the cursor to the Load field, and select one of the following choices to specify how the

programs/samples included in the multi will be handled.

MULTI ONLY: Only the multi will be loaded.

WITH PROGRAMS: The programs included in the multi will also be loaded. (Samples will not be loaded.)

WITH PROGRAMS & SAMPLES: The programs and samples included in the multi will also be loaded.

8. If you selected WITH PROGRAM & SAMPLES or WITH PROGRAMS in step 7, move the cursor

to the Replace same sample in memory field, and turn the [JOG] dial to specify how data already

existing in memory will be handled.

NO (FASTER): If identically-named programs/samples already exist in memory, that data will not be

loaded.

YES: The data will be loaded, overwriting the data currently existing in memory.

9. To execute the load operation, press the [F5] key (DO IT).

Hint: If there is insufﬁcient free space in internal memory, it may not be possible to load the selected ﬁle. In this

case, delete unneeded data from memory to increase the amount of free space.

345