User Guide

Chapter 6—Mixer mode operations
58
4. Use the [Q1]/[Q3] knobs and [Q5] slider of the Q-LINK section to adjust the
mix parameters of the currently selected part.
While the Part page is displayed, you can use the [Q1] knob, [Q3] knob, and [Q5] slider
to adjust the Fx field, Pan field, and Level field of the currently selected part.
5. Repeat steps 2–3 to adjust the mix parameters of each part.
6. If you want to keep the changes you made to the part mixer settings, save the multi.
Note: Q-LINK is temporarily turned off while the Part page is displayed.