User Guide

Chapter 7—Effects

2. If you want to select an effect type, move the cursor to the Effect field of effects 1–4, and turn

the [JOG] dial.

The Select Effect Type popup window will appear. In this popup window you can select the effect type.

A Effect list: Selects the effect type that will be

used.

B [F1] key (CLOSE): Cancels the operation and

closes the window.

C [F3] [F6] key (SELECT): Finalizes the effect

type you selected in

3. Turn the [JOG] dial to select the effect type.

The MPC4000 provides the following effect types. For the effect produced by each type and details of the

parameters, refer to the reference manual.

4. After you have selected an effect type, press the [F6] key (SELECT).

The selected effect type will be ﬁnalized, and the window will close.

5. Press the [F3] key (MIX).

The Mix page will appear. In this page you can adjust the level of the signal that is output from each effect,

and specify whether the direct sound will be output from the effect.

Effect types Effect types

CHORUS>MONO PHASER>XOVER

CHORUS>STEREO PHASER+DELAY

CHORUS>XOVER PITCH CORRECTOR

CHORUS+DELAY PITCH SHIFTER

COMPRESSOR/LIMITER REVERB>AUDITORIUM

DELAY>MONO REVERB>BIG HALL

DELAY>MULTI TAP REVERB>BIG ROOM

DELAY>PAN REVERB>BRIGHT HALL

DELAY>PING PONG REVERB>BRIGHT PLATE

DELAY>STEREO REVERB>DRUM BOOTH

DELAY>XOVER REVERB>LIVE HOUSE

DIGITAL EQ REVERB>MEDIUM HALL

DISTORTION REVERB>MEDIUM ROOM

ENHANCER REVERB>NON LINEAR

EXPANDER REVERB>PLATE

FLANGER>MONO REVERB>REVERSE

FLANGER>PAN REVERB>SMALL HALL

FLANGER>STEREO REVERB>SMALL ROOM

FLANGER>EXPANDER REVERB>STUDIO

FLANGER+DELAY REVERB>THEATER

NOISE GATE REVERB>VOCAL PLATE

PAN>AUTO PAN REVERB>WAREHOUSE

PAN>TRIGGER PAN ROTARY SPEAKER

PHASER>MONO TAPE ECHO

PHASER>PAN WAH>AUTO WAH

PHASER>STEREO WAH>TOUCH WAH