User Guide

Recording (sampling) an external source
65
• If you want to start recording manually
Set the Record Start field to MANUAL. With this setting, recording will begin when you press the appro-
priate key. This method is convenient when you are recording a drum loop etc. from a CD or record.
7. Move the cursor to the Time field, and set the recording time.
When you record, recording will stop automatically when the time specified here has elapsed.
8. Press the [WINDOW] key.
The Recording Setup popup window will appear. In this window you can set various options related to
recording.
A System sampling rate field: Indicates the
sampling rate of the entire system (set in
GLOBAL mode). This field is only for dis-
play, and cannot be changed here.
B Bit field: Selects the resolution (16-bit or
24-bit) used for recording.
C Pre-recording time field: Specifies how much of the signal preceding the actual start of recording will
be included in the recording.
Hint: You can also manually stop recording. For example if you are recording a phrase of an unknown length,
you can set the Time field to a fairly long value, and then manually stop recording.
Start recording
Stop recording
Start recording
Stop recording
time
level
Time parameter
level
Rec start
threshold
parameter
Rec start
threshold
parameter
time
level
Start recording Stop recording
1
3
2