Specifications

32
DRUM PAD NUMBER
DRUM PAD PARAMETERS
If you choose “Drum Pad” as the event type for the footswitch, page 2 allows you to select which pad will be triggered
with the footswitch.
1. Turn [VALUE] dial to select the desired pad (i.e. C4 would be pad 4 in bank
C).
2. Press [ENTER] to accept the setting or [<] to cancel.
OTHER FUNCTIONS
As we mentioned previously, a footswitch may also be used to engage and disengage specific functions on the
MPK49. Simply select which function you would like to control with the footswitch:
NOTE REPEAT – footswitch will turn Note Repeat feature on and off.
TIME DIV – footswitch will enable and disable Time Division.
TAP TEMPO – footswitch will work as a Tap Tempo button.
BANK CHANGE – footswitch will cycle through the 3 different control banks.
PLAY/STOP – footswitch will be used as a Start / Stop button.
PLAY/RECORD – footswitch will be used as a Play / Record button.
ARP ON/OFF – footswitch will enable and disable the Arpeggiator.
ARP LATCH – footswitch will be used as an Arp Latch button.
SUSTAIN – footswitch will be used as a Sustain pedal.
EDITING EXPRESSION PEDAL INPUT
You can think of the expression pedal input on the MPK49 as another fader, for the purposes of this manual. Refer to
‘Editing Knobs and Faders’ section for information on editing the expression pedal input.