IBN68-00711A-00esa E cover 2004.4.
CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRICSHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLEPARTSINSIDE. REFERSERVICING TO QUALIFIED SERVICEPERSONNEL. This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact with any inside part of this product. This symbol alerts you that important literature concerning operation and maintenance has been included with this product.
BN68-0071 IA-00esa_E 1 (walldel) 2004.4.30 2:52 PM Page T Thank you for choosing ESA! Your new ESA product represents the latest in television technology. We designed it with easy-to-use on-screen menus and closed captioning capabilities, making it one of the best products in its class. We are proud to offer you a product that will provide convenient, dependable service and enjoyment for years to come.
Protect the power cord_ Power supply cords should be routed so that they won't be walked on or pinched by objects placed on or against them_ Pay particular attention to cords at plugs, convenience receptacles, and the point where they exit from the unit. Unplug the PDP from the wall outlet and disconnect the antenna or cable system during a lightning storm or when left unattended and unused for long periods of time. This wiJJ prevent damage to the unit due to lightning and power-line surges.
BN68-0071 IA-00esa_E 1 (walldel) 2004.4.30 2:52 PM Page M User instructions Warning The Federal Communications Commission Radio Frequency Interference Statement includes the following warning: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable c_rOtectionagainst harmful interference in a resientiai installation.
i T Wide screen format PDP Displays (16:9,the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video.
BN68-00711A-00esa_E l(walldel) 2004.4.30 2:52 PM Page 7_ (hsssd (entrd Gese[u[ _s£@[mati@s Your New Plasma Display Panel .................... 10 Fine Tuning Channels .................................. 56 Remote Control Buttons ................................ 12 LNA (Low Noise Amplifier) 57 .......................... (@nnectisga P( andO?eratien Connecting VHF and UHF Antennas .............. 16 Connecting to a PC .................................... 60 Connecting Catole TV ...............
2004.4.
BN68-00711A-00esa_E_l(walldel) 2004.4.30 2:52 PM Page 9_ Your New Plasma Display Panel .................................................... Remote Control Buttons ................................................................
Speakers (optional) RemeteCentral Signal Receiver Aim the remote control towards this spot on the PDR SOURCE button Power Jndkat0r Pressto display all of the available video sources (ie., Video, S-Video, Component1, Component2, PC ). Power Off MENUbutton : LED Red Power On (Timer On) : LEDGreen Power On (Timer Off) : LEDOff Displays the main on-screen menu. VOL(+,o)button Press to increase or decrease the voJume_Also used to select or adjust items on the on-screen menu.
@ @ @ @ @ @ Service jack @ Cempenent VideeiAudieinput jacks (YiPb/P,/Audie LiAudieR) For service only. @ DVmmnput jacks Receives the digital video!audio set top box or PC. signals from a @ ExternalSpeukerOutjacks Connect external speakers. @ PC(R6B)inputjacks(1Spin) Connect to the video!audio your PC. Connect to the audio and component output jacks of a DVD player or Set-Top Box. output jacks on @ Antennajack Connect to antenna.
Q Mute button Press to mute the PDPsound. @ 0 PiP butten Activates picture in picture. @ Aspectbutton Press to change the screen size. @ RModebution Adjust the PDP picture by selecting one of the preset factory settings or select your personaJ, customized picture settings. @ S.Mo@butt0n @ Adjust the PDP sound by selecting one of the preset factory settings (or select your personal customized sound settings. @ Modebutt0n Selects a target device to be controlled by the ESA remote control (ie.
@ Sleep butten Press to select a _reset time interval for automatic shutoff_ i@ CH°Scanbutton Press to memorize (scan) the available channels. @ CaptionButton @ Controls the caption decoder. @ PiP€@ntrdButtons Source : Pressto select one of the available signal sources for the HP window. Swap : Exchanges the video signal that is currently displayed on the main screen with the signal in the PIPwindow. Locate : Pressto move the HP window on the screen. S.Swap: Pressto select the audio (HP or Main).
2004.4.
BN68-00711A-00esa_E_2(walldel) 2004.4.30 2:55 PM Page Connecting VHF and UHF Antennas .............................................. Connecting Cable TV.................................................................... 16 17 Connecting Speakers .................................................................... 19 Connecting a VCR ........................................................................ 20 Connecting a Camcorder ..............................................................
If your antenna looks like this: it has 75-ohm round leads.
BN68-00711A-00esa_E2(walldel) 2004.4.30 2:55 PM Page You can connect different cable systems to your PDP, including cable without a cable box, and cable with a cane box that descrambJes some or aJJchannds. Hug the the Anterlna incoming Ca:>e, cable on intoaccess the VHF/UHF terminal on the PD£ Use /y ncuded n the p/oduct packo ]e, 1 Find the cable connected to the ANTENNA OUT terminal on your cable box. This terminal might be labeled _ANT OUT _, _VHF OUT _, or simply _QUV.
To complete this connection you will need a _'o_way splitter, a RF (A/B} switch, and four coaxiai cables (which you can buy from your ESA dealer or any electronics store). 1 Find and disconnect the cable that is connected to the ANTENNA IN terminal of your cable box. This terminal might be labeled "ANT iN", "VHF IN", or simply, "IN". Connect this cane to a two_way sphtter. Cable Splitter Connect a coaxial PUT terminal of the cable splitterbetween and the an IN OUTterminal of the cable box.
BN68-00711A-00esa_E2(walldel) 2004.4.30 2:55 PM Page External speakers are sold seperateJy. Check with your dealer. PoweredSubwoofer (Optionl External speakers MUST have a power handling capability of 10 watts minimum (impedance 8 ohml. Connect the speaker audio cable to the external speaker output jack on the PDP matching the "+" and "-" ends of the cable with the diagram on the PDff Fix the bracket onto the guide pole located on the rear of speaker and fasten the screws.
L C}iii ¸¸ : y/ @ tO O[ PDP Power Plug Audio Cable S-Video CaMe J Video Cable OF J Connect the Video/Audio AUDIO!VIDEO cables between the AUDIO(LiR)iVIDEO jacks on the PDP and OUT jacks on the VCR. (Note: For better video, you can usean S-Videocable.) VideotapePJayback: 1_ Turn on your PDP,and press the SOURCE button on the remote control. 2. Move the joystick up or down to select "Video" or "S_Video", then press the joystick to enter. 3.
BN68-0071 IA-00esa_E 2 (walldel) 2004.4.30 2:55 PM Page PDP .... J L Power Plug Video Cable Audio Cable Connect a Video!Audio VIDEO!AUDIO cable between the AUDIO(L/R)/VIDEQ jacks on the PDPand the OUTPUT jacks on the camcorder. Viewing Tupes 1_ Turn on your PDP,and press the SOURCE button on the remote control. 2. Move the joystick up or down to select the "Video", then press the joystick to enter. 3. Turn on your camcorder and set it to Video Mode.
This PDPdisplays the optimum picture in 720p mode. PDP DVD PJayer Power Plug Video Cable Audio Cable 1 Connect a Video Cable between the Y, Pb, Pr (COMPONENT1,2) and Y!PB!PRoutput jacks on the DVD players. 2 Connect a Audio Cable between the AUDIO L/R(CQMPONENT1,2) and the AUDIO OUT jacks on the DVD player. input jacks on the PDP input jacks on the PDP ToPJayDVD: 1_ Turn on your PDP,and press the SOURCE button on the remote controk 2.
BN68-00711A-00esa_E2(walldel) 2004.4.30 2:55 PM Page This PDP displays the optimum picture in 720p mode. DTV Receiver PDP Power Plug OF Audio Cable DVUCable Use the DVI_Dconnection cable. (sold separately) 1 Connect the cable or antenna to the antenna input jack on the DTV. 2 Connect a Video cable between the Y, Pb, Pr (COMPONENT 1,2) or DVI jack on the PDP and the Y, PB,PR(VIDEO OUTPUT JACKS) on the DTV receiver.
2004.4.
BN68-00711A-00esa_E_2(walldel) 2004.4.30 2:55 PM Page Turning the PDP On and Off .......................................................... 26 Memorizing 28 the Channels .............................................................. Setting Up Your Remote Control ....................................................
PDP Off Press the Power button on the remote controk The PDPwiJJbe turned on and you wiJJbe ready to use it's features_ You can also use the Power button on the front of the PDR Notes: " If your' PDP isn't turned on when the power button is pressed: Press the MODE button to check if the TV mode has been chosen ( }. Your PDPhas a simple, easy-to-use menu system that appears on the PDPscreen. This system makes it con_ venient and fast to use features on the PDP.
DispJeyiegStatusJe[ermetiee Press the Display button on the remote control. The PDP will display the Picture mode, Sound mode, MTS, Signal and Caption.
BNb_-00 /llA-00esa E Z (wa±±de±) 2004.4.30 Z:bb PM Page Your PDP can memorize and store all of the available channels for both "off-air" (antenna} and cable channels. After the available channels are memorized, use the CH /", and CH v buttons to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic} and adding and deleting channels (manual}.
1 First, select the correct signal source (Ant, STD, HRC, IRC}. See steps on previous page. Press the Menu button. Move the joystick up or down to select "Channel", then press the joystick to enter. < An_ Auto Program Fine Tune 4 O LNA 4 Off P. Ant / CAW { Ant _" Fine Tune _ 0 J, LNA 4 Off 1, Ch Scan Move the joystick up or down to select "Auto Program", then press the joystick to enter. Ch Scan ..... 3 ] Enter i) Menu The PDPwill begin memorizing all of the available channels.
Use the added numberorbuttons wiJJbe erased.to directly select the channel that Ant4 Ex) Channel "4" il Press the Add/Erase iii Sleep button: Repeatedly pressing this button wiJJalternate between "Added" and "Erased.
iiiiiiii: !:ii_}_i _:i___iiii::i_ ili_ii_i _I_ (PiP m. Press Menu "Channel", button. Move thepress joystick or down the to select then the up joystick to enter. An_ Auto Program FMe "Tune 4 O _" LNA _ Off _" Ch Scan ¢ Move Movepress the joystick up ortodown then the joystick enter.to select "Ch. Scan", Only the memorized channels are chosen. Move the joystick right to stop.
Press theCHA or CHv buttons tochange channels. When you press the CHA or CHv buttons, the PDPchanges channels in sequence. You will see all the channels that the PDPhas memorized. (The PDPmust have memorized at least three channels.) You will not see channels that were either erased or not memorized. ToView Memorized@annd Pressthe CH.Scan button or the Channel button. Only the memorized channels are chosen. Pressthe number buttons to go directly to a channel.
BN68-00711A-00esa_E2(walldel) 2004.4.30 2:55 PM Page This PDP's remote control can operate almost any VCR, cable box, or DVD_ After it has been set up properly, your remote control can operate in four different modes :TV, VCR, Cable, or DVD_ Pressing the corresponding button on the remote control allows you to switch be_/een these modes, and control whichever piece of equipment you choose. N> e: /_e ;<.
BN68-00711A-00esaE2(walldel) 2004.4.30 2:55 PM Page 3(_) Re_oteControJ(odes VCR Codes A&mrai Aiwa Akai 00O.079 015 017,022,023,027,030 Audio Dynamics 014,016 Bell &rHowell 002 Broksonk 010 Candle 007,009,013,045.
BN68-00711A-00esa_E_2(walldel) 2004.4.30 2:55 PM Page 3_ Customizing the Picture ................................................................ 36 Using Automatic Picture Settings .................................................... 37 Selecting the Color Tone................................................................ 38 Viewing the Picture-in-Picture .......................................................... 39 Changing the Screen Size ..................................................
You can use the omscreen menus to change the Contrast, Brightness, Sharpness, Color, and Tint settings of your PDP. Press the Menu button, then press the joystick to enter. Custom Ad}us_ Color Tone Move Move the joystick up or down to select "Adjust", then press the joystick to enter. You wiJJalso see the items "Contrast", "Brightness", "Sharpness", "Color" and "Tint". 4 Select Menu 4 Normal Brightness _ 50 Sharpness Color _ _ 50 50 80 s Tint Move the item.
Your PDPhas automatic picture settings that allow you to adjust the video display easily. Press the Menu button, then press the joystick to enter. Custom Adjust ColorTone Move the joystick left or right to select "Custom", "Dynamic", "Standard" or "Movie" picture setting. ', You can select "High", "Middie", "Low" or "Custom" in PC!DVI mode. _ Custom I, Dynamic X Adjust ColorTone I Custom I, :s Move 3 Select Menu Press the Menu button to exit.
Press the Menu button, then press the joystick to enter. Ad}ust Color Tone ....M..... Move the joystick up or down to select "Color Tone", then move the joystick left or right to select "Normal', "Warm1 ", "Warm2", "Cool2" or "Cool1 " o You can select "Custom", "Color1 ", "Color2" or "Color3" in PC mode. o You can select "Cdorl ", "Cdor2" or "Color3" in DV[ mode. Press the Menu button to exit.
BN68-00711A-00esa_E2(walldel) 2004.4.30 2:55 PM Page Press the Menu "PIP", button.then Move thethe joystick up to or down to select press joystick enter. Off b_q_ i i _s Select :si Menu Move the joystick left or right to select "On". The PIP image wiJJappear in the corner of the screen. 3 Press the Menu button to exit. 0 : HP and Swap Operate X : HP doesn't Operate PiPSettings X ....
You can use PIPto view a signal from an externai source, such as a VCR. Press the Menu "PIP", button.then Move thethe joystick up to or down to select press joystick enter. _ On TV Size 4 Large Locate _ _ Select 4 On _" { Large _" Source _- Swap Move the joystick up or down to select "Source". Swap Size 3 Tv Move the joystick left or right to cycle through all of the avaiiabie signai sources: "TV", "Video", "S_Video", "Component 1", "Component 2", "PC" and "DVF.
PiP Press the Menu "PIP", buttomthen Move thethe joystick up to or down to select press joystick enter. Source _ TV Size _i Large Select '_ On Source 4 TV Size _ Large _ Loca_e 4 _J= I_ Swap Move the joystick up or down to select "Swap", then press the joystick to enter. The image in the HP window will appear on the main screen, and vice versa. 3 _' Press the Menu button to exit. &Swap Press the &Swap button to switch between the Main or Sub (HP} audio source.
Size Press the Menu button. Move the joystick up or down to se ecr r_ , then press the joystick to enter. Move the joystick up or down to sdect S'ze'. Select _ On Source _ TV Swap Loca_e Ant/C/XTV Channel S MOVe Move the joystick Jdt or right to select "Small", "Double" or "Large". Press the Menu button to exit.
iiiiiiii: !:ii_}_i _LI __ijii::i_ ili_ii_i _I_ PiP ÷ Press the Menu button. Move the joystick up or down to seJect "PIP", then press the joystick to enter. Source _ TV Size _i Large Locate ,I ,M,o, v ......................... :_3Menu Move the joystick up or down to seJect "Locate". _i}7 Move where the you joystick want. Jeffor right to move the PIPscreen / Swap Size _ Large Press the Menu button to exit.
Press the Menu button. Move the joystick up or down to se ecr. tJnlp_ r_ , then press the joystick to enter. / 4 ( On *_ Large F Source swap size Locate Ant/CAl"V Channel $ lv_ove Move the joystick up or down to select "Ant/CATV". Move the joystick, left or right to select "Ant", "STD", "HRC" or "IRC". Select _ On Source _ TV Swap Size 4 Large Locat_ c, ' '_ ,_.................. ' Channel Move J' > STD 5 _ Selectj _FMenu L,- 3 Move the joystick up or down to select "Channel'.
BN68-00711A-00esa_E2(walldel) 2004.4.30 2:55 PM Page When you press the Aspect button on the remote control, the PDP's screen mode should appear in sequence. The screen displays in this order: Wide, Panorama, Zoom1, Zoom2, Normal. ', If you watch a still image or the Normal (4:3) mode for a long time (over 2 hours), an image may be burned onto the screen. View the monitor in Wide or Panorama mode as much as possible. Wide Sets the picture to 16:9 wide mode.
BN68-00711A-00esaE2(walldel) 2004.4.30 2:55 PM Page 4_> StiJJ Press the Still huron on rne emote control ro Freeze a moving olcrure. Press again to cancel. [_ _PModeS.
BN68-00711A-00esa_E_2(walldel) 2004.4.30 2:55 PM Page Customizing the Sound ................................................................ 48 Using Automatic Sound Settings .................................................... 49 Choosing a Multi-Channe! Sound (MTS)Soundtrack .......................... 50 Using the Auto Volume .................................................................. 51 Using Dolby Virtual ......................................................................
Press the Menu "Sound", button. Move joystick up or down to select then the press the joystick to enter. Mode MTS Custom I. Mono _, Auto Volume _ Off _" Dolby Vfftual Woofer _ Off _" # Move Move the joystick up or down to select "Adjust", then press the joystick to enter. You wiJJalso see the items "Bass", "Treble" and "Balance".
Press the Menu "Sound", button. Move joystick up or down to seJect then the press the joystick to enter. Mode _1 MTS 'I Auto Valume 4 Custom _, Mona I. Off I, Music I, Mona _" Woofer Move the joystick Jeftor right to seJect "Custom", "Standard", "Music", "Movie" or "Speech" sound setting. 3 Mode Adjust MTS _1 _ Auto Volume { Off Dolby VMual Woofer 4! Off _" Press the Menu button to exit.
Depending on the particular program being broadcast, you can listen to stereo, mono, or a Separate Audio Program. (SAP audio is usually a foreign-language translation. Sometimes SAP has unrelated information like news or weather.) Press the Menu "Sound", button. Move joystick up or down to select then the press the joystick to enter. Move the joystick up or down to select "MTS". Mode I Standard I, Mone I. Adjust MTS 'q Auto Volume _1 Off m Move theorjoystick "Stereo" "SAP".
BN68-00711A-00esa_E2(walldel) 2004.4.30 2:55 PM Page Each broadcasting station has its own signal conditions, which can make it necessary to adjust the volume every time the channel is changed. "Auto volume" Jetsyou automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low. Press the Menu "Sound", button. Move joystick up or down to select then the press the joystick to enter.
This feature alJows the PDP's optional L/R speakers to provide a Home Theater-Jike DoJby effect. The center and surround sounds are mixed into the L/R speakers. Press the Menu button. Move the ioystick up or down to select "Sound", then Fess the ioystick to enter. Move the ioystick up or down to seJect "DoJby Virtua{". Mode 4 Standard Adjust MTS ,_ Mono I_ Auto Volume _ Off b" DOIby Vidual '_ Off _" Woofer 3 Move the joystick left or right to select "On".
BN68-00711A-00esa_E2(walldel) 2004.4.30 2:55 PM Page 5_ Press the Menu "Sound", button. Move joystick up or down to select then the press the joystick to enter. Mode _1 Custom I, Mono I. Off I, Adjust MTS 'q Auto Volume 4 #_lw Vid0al _ off Woofer Move the joystick up or down to select "Woofer", then press the joystick to enter.
BN68-00711A-00esa_E_3(walldel) 2004.4.
BN68-00711A-00esa_E_3(walldel) 2004.4.30 3:7 PM ii! ¸¸¸¸¸¸ iill ;i Page ! 55_ ;!!i ilk i!!iiili ¸¸ Fine Tuning Channels .................................................................... 56 LNA (Low Noise Amplifier) ............................................................
BNb_-00/IIA-00esa E 3(walldel) 2004.4.30 3: / PM Page b_ Use fine tuning to manuaJJy adjust a particuJar channeJ for optimaJ reception. Press Menu "ChanneJ", button. Move thepress joystick or down the to seJect then the up joystick to enter. Move 2 Select Menu Move the joystick up or down to seiect "Fine Tune". Ant / C/_TV 4 Ant _ Off _ Ant _ Off _* Auto Program LNA Ch Scan Move the joystick Jeftor right to adjust the fine tuning.
BN68-00711A-00esa_E3(walldel) 2004.4.30 3:7 PM Page 5: if the TV is operating in a weak-signal area, sometimes the LNA function can improve the reception (a low-noise preamplifier boosts the incoming signal). Press Menu "Channel", button. Move thepress joystick or down the to select then the up joystick to enter. Move the joystick up or down to select "LNA".
BN68-00711A-00esa_E_3(walldel) 2004.4.
BN68-00711A-00esa_E_3(walldel) 2004.4.30 P 3:7 PM L A S Page 59_ M A D I S P L A Y P A N E L Connecting to a PC ...................................................................... 60 Adiusting the PC Screen ................................................................ 64 Changing the Position of the image ................................................ 65 Changing the Size of the Image .................................................... information ........................
Connection to a Macintosh PC may require an adaptor that fits the PC terminal. PDP iii ii_ _iiii ®iii _iii Power Plug Use the DVI-D connection cable_ (sold separately} DVI CaMe PC CaNe Audio Cable DVIiack (Theactualconfigurationon your PC may be different, dependingon the rnodek) pc _ _ _ 1 Connect a PC (15pin} cable between the Video Output jack (or DVI jack} on the PC and the RGB IN (or DVI IN} Input jack (15p D-SUB} on the PDP.
Pin DoSubCable DVFD CaBle (Digital-Only Cennecter) o 15Pin Signal Cable (based on protruded pin} PC!UT PinNo PC IN ] Red (R) Red (R) 1 T,M,D,S, Data2= 13 T.M.D,S, 2 Green(O) Green (G) 2 T.M.D.S. Data2+ 14 +SV Power Pin No Signal Assignment Signal Assignment Data3+ 3 BUue(B) BUue(B} 3 T.M.D.S. Data2/4 15 Ground 4 5 Grounding Grounding(DDC) Grounding 4 T.M.D.S. Data4= 16 Hot Plug Detect 5 T.M.D.S. Data4+ 17 %M.D.S.
to upYour PC i} The Windows display-settings for a b,picai computer are shown below. However, the actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video car& But even if your actual screens look different, the same, basic set-up information wiJJapply in almost oil cases.
Notes_ Both screen position and size will vary, depending on the type of PC monitor and its resolution. The table below shows aJJof the display modes that are supported: Vertical Horizontal Vertical Horizontal Frequency(Hz} Frequency(KHz} polarity polarity 70.086 31.469 N P 85.080 37.861 N P 640 X 400 85.080 37.861 P N 720 X 400 70.087 31.469 P N 85.039 37.927 P N 59.940 31.469 N N 72.809 37.861 N N BM PC/ AT 75.000 37.500 N N Compatible 85.008 43.269 N N 56.
P_ese): * Press the Source button, then move the ioystick up or down to select PC. Press the ioysfick to select PC mode :7: 7: Press the Menu button, then press the joystick to enter. Custom Adjus_ Cobr Tone I Custom Color Adius_ Move the joystick up or down to select "Color Tone", then move the joystick left or right to select "Custom". When "Custom" is selected, the word "Color Adjust" wiJJappear on the screen.
BN68-00711A-00esa_E3(walldel) 2004.4.30 3:7 PM Page 65_ P[eset: ® Press theSourcebuffon, thenmove theioysfick up ordown toselect PC Press theioystick toselect PC mode Press Menu "PC", button.then Move thethe joystick up to or enter. down the to select press joystick f Adjust Scaling 4 Wide Informatbn Auto Adjust Move ]Enter :Menu Press the joystick to enter, then adjust the screen position by using the joystick button. Down Press the Menu button to exit.
P£eset: • Pressthe Source button, then move the ioystick up or down to select PC. Pressthe ioystick to select PC mode Press the Menu "PC", button.then Move thethe joystick up to or enter. down to select press joystick Move the joystick up or down to select "Scaling". ::Move Select Menu Move the joystick left or right to select "Wide" or "Normal". Position Adjust Normal Information Auto Adjust .... Press the Menu button to exit.
P_eset_ Pressthe Source button, then move the ioystick up or down to selectPC. Pressthe ioystick to selectPC mode. Press Menu "PC", button.then Move thethe joystick up to or enter. down the to select press joystick Adjus_ Scaling _nformation 4 Wide _" Au_o Adius_ Move Move the joystick up or down to select 'qnformation", then press the joystick to enter. The vertical, horizontal frequencies and resolution appear. Enter _::Menu Position Adiusi Scaling .
BNb_-00/llA-00esaE&(wa±±de±) 2004.4.30 &:/ PM Page 65Q i Preset" * Press the Source button, then move the ioystick up or down to select PC. Press the ioysfick to select PC mode Press the Menu "PC", button.then Move thethe joystick up to or enter. down to seiect press joystick Move the joystick up or down to select "Auto Adjust", then move the joystick left or right to enter.
P_ese_: * Press the Source button, then move the ioystick up or down to select PC. Press the ioystick to select PC mode 7 Press Menu "PC", button,then move the the joystick up to or enter. down the to seiect press joystick Adjust Scaling I Wide Information Move the joystick up or down to select "Adjust", then move the joystick left or right to enter. Position k st Scaling Information Wide Auto Adiust 3 Move the joystick up or down to select "Coarse".
P_ese_: * Press the Source button, then move the joystick up or down to select PC Press the joystick to select PC mode k ¸¸ Press the Menu "PC", button.then Move thethe joystick upto orenter. down to select press joystick Adjust Scaling I Wide I, Information Move the joystick up or down to select "Adjust", then move the joystick left or right to enter. Move 3 Move the joystick up or down to select "Fine". Remove picture noise (vertical stripes} on the screen by moving the joystick left or right.
BN68-00711A-00esaE4(walldel) 2004.4.30 3:8 PM Page 7 iiii! !!i!i! !!i_!iiii_i!i!_ii!i_i_!!i!iiieii!ii!_ii!_ii_i! ii _¸¸'_¸¸ iii !i!!i i!!il !i!i!i! !i!!i i!iiiiii!ilil iil _¸¸_¸¸ i!k ii!i_ il¸¸ Setting the Clock ....................................................................... 72 Setting the Sleep Timer ............................................................... 73 Setting the Timers ......................................................................
BNb_-00/IIA-00esa E 4(wa±±de±) 2004.4.50 3:_ PM Page /2_ o Press the Menu "Function", button. Move thepress joystick or down to select then the up joystick to enter. English Time Caption NR _ Off Auto Power Off _ Off _ Off I, V-Chip Film Mode Move Sebct I, ; Menu Move the joystick up or down to select "Time", then press the joystick to enter.
BN68-0071 IA-00esa_E 4 (walldel) 2004.4.30 3:8 PM Page 7[ You can set your PDP to automatically turn off after a preset interval. Press the Menu 'Fund'on", button. Move thepress joystick or down to select then the up joystick to enter. _ Time English h( Caption NR Auto Power Off ,I _ Off Off I, _' _ Off I' VOhip Film Mode Move 4 Select ;Menu Move the joystick up or down to select "Time", then press the joystick to enter.
using the timers, you must set the PDP's clock, as described previously. Setting the On/Oil 11met i_::ii Press the Menu "Function", button. Move thepress joystick up or down to select then the joystick to enter. English it?? Caption NR 4 Off Auto Power Off _i Off 4 Off _" V-Chip Film Mode _! Move the joystick up or down to select "Time", then press the joystick to enter. 3 Move the joystick up or down to select "On Time".
Move Ieft joystick or right up to select or "On", the thenjoystick move the down "Off" to select "Off" or "On". Clock 10:30 am 7:30_m On Off Time : am Off Sleep O'f On Time Volume 10 On time Channel 3 i_i!iiiiiiii!!iii ;_Adjust Move _; Menu to If you select want the to"Off set Time". Off Time, move the joystick down Set the "Off Time" just as you set "On Time". Clock OnTime ( Sleep OnTime Channel 8 12:00 7:30 : am am On am Off Off 3 Press the Menu button to exit.
BN68-00711A-00esaE4(walldel) 2004.4.30 3:8 PM Page 76_> The oreferred channel ana vowme can De set foi wnen me timer automatical y turns on me TV. Press tr/e Menu "Function button. Movemen tr/eoress ioysrtcK aown to select the to enter. up or oystick English Time Caution Nr_ Aulo Power Off • Off • Off • Off • V-Chb Film Mode L_ Move Select Men[ Move me joystick up or aown to select "Time" men oress me oystick to enter.
BN68-00711A-00esa_E_4(walldel) 2004.4.30 3:8 PM Page 77_ Selecting a Menu Language ..................................................... 78 Viewing Closed Captions ......................................................... 79 Digital Noise Reduction ........................................................... 80 Setting Auto Power Off ........................................................... 81 Using the V-Chip .....................................................................
Press the Menu "Function", button. Move thepress joystick or down to select then the up joystick to enter. !:i ': English T_m_ Caption NR _ Off Auto Power Off '_ Off _1 Off J' V Chip Film Mode Move Select Move the joystick Ieft or right to select the appropriate language : English, Francais or EspaBoL ; i_ Menu iiii _i_I < Frangais k Heure L6gende R6cuc, bruit _ Oft Eteinte '_ Off aklto _" V-Chip i Press the Menu button to exit.
BN68-00711A-00esa_E4(walldel) 2004.4.30 3:8 PM Page 7! Your TV decodes and displays the closed captions that are broadcast with certain TV shows. These captions are usually subtitles for the hearing impaired or foreigm language translations. All VCRs record the closed caption signal from television programs, so home-recorded video tapes also provide closed captions. Most prerecorded commercial video tapes provide dosed captions as well.
If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen. Press the Menu "Function", button. Move thepress joystick or down to select then the up joystick to enter. _! ;i ,: English T_mo Caption NR '_ Off _* Auto Power Off '_ Off _' _1 Off V Chip Film Mode Move 2 Select ; Menu Move the joystick up or down to select "NR".
BN68-00711A-00esa_E4(walldel) 2004.4.30 3:8 PM Page 8_ The PDPcan be set to turn off automatically if no buttons are pressed for 3 hours after the PDPturns on via the On timer. Press the Menu "Function", button. Move thepress joystick or down to select then the up joystick to enter. English Time Cap_ion NR _ Off Auto Power Off < Off '_ Off J" VChip Film Mode _Move Select I, ;Menu Move the joystick up or down to select "Auto Power Off". 3 Move the joystick left or right to select "On".
The V-Chip feature automatically locks out programs that are deemed inappropriate for children. The user must enter a PIN (personal ID number) before any of the V-Chip restrictions are set up or changed. Note : When the V-Chip feature is activated, the HP and auto channel program features do not function. Up 1 Press the Menu button. Move the joystick up or down to select "Function", then press the joystick to enter.
l0 Press the Menu "Function", button. Move thepress joystick up or down to select then the joystick to enter. English Time Caption NR _ 01I V-ChipAuto Power Off _ Off _" Move the joystick up ortodown then press the joystick enter.to select "V-Chip", The message "Enter Pin" wiJJappear. Enter your 4-digit PIN number. Theenable "V-Chip" appear. To the screen V-Chip will feature, move the joystick to the right so that the "V-Chip Lock" field is Yes.
t0Set up ' First, set up a personal identification number (PIN), and enable the V-Chip. (See previous section.) Parental restrictions can be set up using either of two methods: The TV guidelines or the MPAA rating. Press the Menu "Function", button. Move thepress joystick or down to select then the up joystick to enter. English Time Caption NR AUtO Power Off '_ Off I, _ Off _" '_ Off V-Chip Film Mode Move Move the joystick up or down to select "V-Chip", then press the joystick to enter.
6 At this point, one of the TV-Ratings is selected_ Move the joystick to the right: Depending on your existing setup, a letter "U" or "B" wiJJstart blinking_ (U= UnbJocked, B= Blocked) While the "U" or "B" is blinking, move the joystick up or down to block or unblock the category_ Move the joystick to the right to save the TV guidelines. A W-Rating will be seIected, and no letters wiJJ Mink. To select a different TV-Rating, move the joystick up or down and then repeat the process.
gs: G,PG, PGo13, R,N[o17, × TheMPAA rating systemusesthe Motion PictureAssociationof America (MPAA)system,and its main application is for movies.When the V-Chiplock is on, the TVwill automatically block any programsthat are coded with abiection_ able ratings (eitherMPAA or TV-Ratings}. Press the Menu "Function", button. Move thepress joystick up or down to select then the joystick to enter.
tO TV If the TV is tuned to a restricted channel, the V-Chip wiJJ block it. The screen wiJJgo blank and the following message will appear: "Excessive rating." To resume normal viewing, tune to a different channel using the number buttons. Under certain conditions (depending on the rating of the local TV programs/the V-Chip might lock out all the channels. In this case, use the V-Chip function for an "emergency escape": Press the Menu button.
BN68-00711A-00esa_E_4(walldel) 2004.4.30 3:8 PM Page 88<_> Press me Menu "button. Move meoress ]oysNcK aown to se.ec.tt Function" men me L-_o.s_c.. iupv or ti to enter.
BN68-00711A-00esa_E_4(walldel) 2004.4.30 3:8 PM Page 89_ !¸!ill iii_iiii! _;!i_ Troubleshooting ............................................................................ Care and Maintenance ................................................................ 90 91 Specifications ..............................................................................
T Before you call a service technician, please scan this list of problems and possible solutions. It may save you time and money. P0ssibJeSduti0n Check all wire connecnons. m Press the "Mode" mode. button to put your remote co _troJ in the "TV Replace batteries Check if the power plug is connected Check to see that both the PDPand Thesource are plugged Jn and turned cn. Adjust the Brightness or Contrast settings.
BN68-00711A-00esa_E 4(walldel) 2004.4.30 3:8 PM Page 9[ With proper care, your PDPwill give you many years of service. Please follow these guidelines to get the maximum performance from your PD£ J4entiJyingPr0BJems '_ '_ '_ '_ Do not put the PDP near extremely hot, cold, humid or dusty places. Do not put the PDP near appliances that create magnetic fields. Keep the ventilation openings clean Do not place the PDP on a rough and slanted surface, such as cloth or paper.
Exterior design and product specifications are subject to change without prior notice to improve the performance of this product. PDP4294LV 1027 (W} X 79 (D}X 630.5 (HI mm; 40.43 (W) X 3.11 (D}X 24.82(H)inches 54 (W) X 31.5 (D1X220 (H)mm ; 2!3 (W} X 124 (D)X 8.66 (H}inches 31 kg ; 68.34 Ibs {37.6 kg ; 82.89 Ibs (with stand)} 150g (includingbatteries); 0.
BN68-00711A-00esa_E 4(walldel) 2004.4.
BN68-00711A-00esa_E 4(walldel) 2004.4.
BN68o00711AoO0
