MICRO MUSIC SYSTEM QX-D5370 Operator's manual (GB) 1~27
IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product* enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
19. DAMAGES REQUIRING SERVICE - Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions. a) When the power-supply cord or plug is damaged. b) If liquid has been spilled, or objects have fallen into the product. c) If the product has been exposed to rain or water. d) If the product does not operate normally by following the operating instructions.
IMPORTANT SAFETY INSTRUCTIONS..............................................................................1 PRECAUTIONS FOR UNIT..................................................................................................2 PRECAUTIONS FOR DISCS...............................................................................................2 TABLE OF CONTENTS.......................................................................................................3 IMPORTANT NOTES............................
IMPORTANT NOTES • Avoid installing this unit in places exposed to direct sunlight or close to heat radiating appliances such as electric heaters, on top of other stereo equipment that radiates heat, places lacking ventilation or dusty areas, places subject to constant vibration and/or humid or moist areas. • Do not attempt to clean this unit with chemical solvents as this might damage the finish. Use a clean dry cloth. • Operate controls and switches as described in the manual.
PREPARATION FOR USE UNPACKING AND SET-UP • Carefully remove the unit from the carton and remove all packing material from the unit. • Remove any labels or stickers which may be on the front or top of the set, but do not remove any labels from the back or bottom. • We suggested that you retain the original carton and packing materials in case it ever becomes necessary to return your unit for service. This is the only sure way to protect the unit from damage in transit.
LOCATION OF CONTROLS 11 1 12 13 2 15 4 3 5 14 16 17 18 19 20 21 22 23 24 CD 6 7 8 9 25 10 26 31 27 29 30 28 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. STANDBY/ON FUNCTION TUNER/BAND STOP PRE-UP PROGRAM/CLOCK-DISPLAY PRE-DOWN TIMER SKIP/SEARCH DOWN PHONES DBBS LCD DISPLAY REMOTE SENSOR VOL-UP STANDBY INDICATOR VOL-DOWN GB 6 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31.
REMOTE CONTROL 1. Standby/On Button 2. Preset EQ Button 3. DBBS Button 4. Direct Search Button 5. Timer Button 6. Sleep Button 7. Random/RDS Button 8. Intro Button 9. Stop Button 10. Program/Clock Button 11. Tuner/Band Button 12. Tape Button 13. Preset Down Button 14. Skip Down Button 15. Volume Down Button 16. Mute Button 17. ESP/Find/ST Button 18. Repeat/PTY Button 19. Play/Pause Button 20. Function Button 21. Preset Up Button 22. Skip Up Button 23.
OPERATING INSTRUCTIONS SPEAKER CONNECTION Connect each speaker to the corresponding speaker terminals on the back panel of the main unit. Make sure that the left speaker plug is connected to the left (L) speaker jack and the right speaker plug is connected to the right (R) speaker jack. PRESET EQUALIZER • This unit is equipped with a preset equalizer which has been added to enhance your listening pleasure by altering the frequency response of the music.
DBBS Press DBBS button to obtain the DBBS effect. Press this button again the "DBBS" resume to the normal sound effect. Random In CD mode, press "Random" button, the display will show "Random" and CD disc will play in random sequence immediately. Press "Random" again, the "Random" mark will disappear from display and CD disc will play in normal sequence. Press "Stop" button to stop the CD. SLEEP FUNCTION You can set the unit to switch off after certain period of time as follows: 1.
TUNING TO A PRESET STATION Select the desired station preset number by pressing the PER-UP/PER-DOWN button. ANTENNA For FM reception there is a built-in antenna wire at the rear of the unit. Unravel the wire and move it around to obtain the best reception RDS (RADIO DATA SYSTEM) RDS is a system transmitting additional information via FM stations. Broadcasting stations with RDS transmit their program name or program type for instance . This is indicated in the multifunction display.
CLOCK SETTING 1) Press the STANDBY/ON button to turn the unit off standby. 2) Press and hold the PROGRAM button, the 24Hr will appear on the display. Press the skip/search or button. Once for select your suitable Hours for the clock. 3) Press the PROGRAM button ONCE. The Minutes segments display "0". The Hour segments flash continuously. 4) Press the Skip/Search or button to select the desired hour. 5) Press the PROGRAM button again and the minute segments flash.
NOTE: • Clock time is only retained while the unit is plugged into the AC outlet. In the event of a power failure the clock will need to be reset the power supply resumes. PLAYING COMPACT DISCS/MP3 DISCS LOADING AND UNLOADING COMPACT DISCS/MP3 DISCS 1. Press the STANDBY/ON button to turn the unit 'ON'.The STANDBY/ON indicator lights'OFF' and the LCD Backlights'ON'. 2. Select the CD function by pressing the FUNCTION or CD button. 3. Press the CD OPEN/CLOSE button to open the CD compartment. 4.
DISC PLAY 1. Insert a CD as described in the previous section and close the disc compartment. 2. The display will then show the total number of tracks and total play time. 3. Press the PLAY/PAUSE track of the disc. button. Disc play will begin from the start of the first 4. As each track on the CD disc is played, show in the display. CD MODE MP3 MODE CD 5. A particular track can be selected using either of the CD Skip buttons.
TO STOP A CD BEFORE THE DISC ENDS 1. Press the Stop button. Disc play will stop, and the display will show the total number of tracks. 2. To temporarily stop disc play (Pause mode), press the PLAY/PAUSE play will stop at the current play position. The display will flash. CD MODE button. Disc MP3 MODE CD 3. To resume disc play, press the PLAY/PAUSE button again. TRACK SKIP Starting disc play from the beginning of a particular track.
To skip to the previous track on a disc. For example to skip back to the beginning of track 3 while track 4 is playing. 1. Press the Reverse Skip track button twice. Disc play will resume at the beginning of track 3. Skip track button is 2. The CD player will skip back one track each time the Reverse pressed. If this button is pressed in the middle of a track, the CD player will skip back to the beginning of that track. To make if skip back to the previous track press the Reverse Skip track button twice. 3.
REPEAT DISC PLAY Use the REPEAT button to play an entire disc or one track continuously. CD MODE Repeat play of all tracks 1. Press the REPEAT/PTY button twice. The "ALL appears in the display. " indicator MP3 MODE 2. Press the Play/Pause button. 3. The disc will then begin playing through to the end of the last track. At which point it will automatically return to the beginning of the first track. This will continue until the Stop button is pressed. 4.
ENTERING A PROGRAM 1. Press the PROGRAM/Clock-Dispaly button. "PROG" appears and the following information will be display on the display: 2. Select the first desired track using the Forward Skip Buttons. and Reverse 3. Press the PROGRAM/Clock-Dispaly button. The first program selection is now stored in the program memory. The display will now show: 4. Select the next desired track using the Forward Reverse Skip Buttons. and 5. Press the PROGRAM/Clock-Dispaly button.
NOTES: • If the PLAY/PAUSE button is pressed before the PROGRAM/Clock-Display button is pressed to store a track, the track will not be programmed, and the disc will start playing from the first selected track. • Any track can be programmed to play more than once. • Repeatedly pressing the PROGRAM/Clock-Display button will enable you to check the program if required. LISTENING TO PROGRAMMED TRACKS 1. Enter all tracks you want to program into memory following the procedures above. button.
NOTES ON MP3 DISCS An MP3 file stores audio data compressed using MPEG 1/2, the audio layer-3 file-coding scheme. In this manual, we refer to what, in PC terminology, are called "folders" and "Files" as "albums" and "tracks" respectively. Notes on playing MP3 discs • An MP3 track must be recorded on a disc in the format compliant with ISO 9660. Note however, that system may not play tracks in the order they were recorded.
CASSETTE TAPE OPERATIONS Playing A Cassette Tape 1. Select the Tape function by pressing the FUNCTION button. 2. Press the Cassette Stop/Eject button to open the Cassette Compartment door. 3. Insert a pre-recorded cassette tape into the slots on the inside of the cassette door with the full reel on the right side and the open edge facing up. Close the Cassette Compartment Door. button to begin playback. 4. Press the Cassette Play 5. Adjust the Volume and DBBS controls as desired. 6.
4. Press the Cassette Record button. The Cassette Play button will also engage and recording will begin. If you wish to stop the tape temporarily to avoid recording certain material such as a radio commercial, press the Cassette Pause button. Press again to cancel the pause mode and resume recording. button to stop the tape and 5. When you are finished recording press the Stop/Eject open the Cassette Compartment Door.
Safeguard Against Accidental Erasure When a new recording is made, any program material previously recorded is automatically erased and only the new recording remains. To safeguard valuable recordings from being erased accidentally, the cassette and the deck are equipped with a special device. On the back of the cassette there is an erase prevention tab on each side. To prevent accidental erasing, break out these tabs with a screwdriver.
CARE AND MAINTENANCE COMPACT DISC CARE • To remove a disc from its storage case, press down on the centre of the case and lift the disc outs, holding if carefully by the edges. • Fingerprints and dust should be carefully wiped off the disc's recorded surface with a soft cloth. Unlike conventional records, compact discs have no grooves to collect dust and microscopic debris, so gently wiping with a soft cloth should remove most particles. Wipe in a straight line from the inside to the outside of the disc.
Tape Head Cleaning Cotton Swab The tape heads, pinch roller and capstan require Capstan periodic cleaning. This removes particles of the metal oxide coating that wear off the tape and accumulate on these parts and impair performance. Switch off the power, press the Head Pinch Roller STOP/EJECT key to open the cassette door, key. Clean the tape heads, pinch roller and capstan with a soft and press the PLAY cloth or cotton swab dampened in isopropyl alcohol or special tape head cleaner.
TROUBLESHOOTING GUIDE Should this unit exhibit a problem, check the following before seeking service. Symptom Radio Noise or sound distorted on AM or FM broadcasts. Possible Cause Solution Station not tuned properly for AM or FM. FM: Antenna is not extended. AM: The bar antenna is not positioned correctly. Retune the AM or FM broadcast station. Extend FM antenna. FM STEREO indicator does not light. FM station is mono or station signal is weak. Extend FM antenna. Try other strong stations.
Model : QX-D5370 Specification Main Unit FM tuner section Tuning range Usable sensitivity (30 dB S/N) Antenna terminals 87.5 MHz to 108 MHz (50 KHz Step) 22 dBµ Antenna Wire MW tuner section Tuning range 522 KHz to 1620 KHz (9 KHz Step) Usable sensitivity Antenna 65 dB/M Ferrite Bar Amplifier section Power Output Output RMS 5.0 Watt (3.
