Operation Manual

GB 21
CD Cassette Synchro Recording
When recording from CD to cassette, the CD cassette synchro recording feature in this
unit allows you to start both the CD player and the cassette recorder with the push of a
single button.
1. Open the CD door and place the CD to be recorded in the CD player as usual. Close
the CD door.
2. Open the cassette compartment and insert a blank cassette tape into the slots in the
cassette door with the full reel on the right side and the open edge facing up. Close
the cassette compartment door.
3. Set the function selector to the CD position.
4. Press the cassette
“Record” button. The cassette recorder and the CD player will
start simultaneously and all of the material on your CD will be recorded directly
onto the blank cassette.
NOTE : If a CD is already playing and you press the cassette “Record” button, the CD
player will back up to the beginning of the track being played and the cassette
will begin recording at that point automatically.
Cassette Tape Recommendations
Standard tape lengths have 15(C-30) and 30(C-60) minutes of
recording time on each side. Longer length tapes of 45 (C-90) and
60 (C-120) minutes of recording time on each side are available,
but because longer tapes in the same size package necessitate
the use of thinner materials, the chance for malfunction is much
greater. Longer length tapes are not recommended. Use only high
quality tapes. If a problem develops, check the unit first with another
cassette to determine if the problem is with the cassette, and not
the unit.If there is any slack in the tape in the cassette, it should
be removed before inserting the cassette. Place a pencil in one of the hubs and rotate
toward the outside of the cassette until all slack is taken up.
4. Press the Cassette Record button. The Cassette Play button will also engage and
recording will begin.
If you wish to stop the tape temporarily to avoid recording certain material such as a
radio commercial, press the Cassette Pause
button. Press again to cancel the pause
mode and resume recording.
5. When you are finished recording press the Stop/Eject
button to stop the tape and
open the Cassette Compartment Door.
Fig.1
Fig.2