Instruction manual

30 The Sampler Editor MESA II
Disk Window
The Disk Window shows the contents of a floppy disk or the external SCSI devices
connected to the Sampler.
The upper part of the window shows;
Floppy icon: Clicking this icon accesses to the floppy disk.
SCSI icon: Clicking this icon accesses to the SCSI devices connected to
the Sampler.
Total in volume: Total capacity of the currently selected volume.
Size of selection: Size of the selected item
The lower part of this window shows three columns: the Program List on the left, the
Sample List in the middle, and other miscellaneous files on the right.
When you click the SCSI icon, the volume list in the current partition of Sampler HD
(including CD-ROM, etc.) is displayed at the upper half of window. You can select the
partitions from the pop-up menu. You can enlarge this area by dragging the mouse
over the horizontal division bar.
Dragging and dropping the selected item from Disk Window to the Memory Window will
load them to the Sampler.
Note that drag and drop works only on the selected item and the associated samples to
the program will not be loaded automatically. To load all the associated samples with
the program automatically, select Load Selected Items using "Open..." from the File
Menu, or double click the program on the Disk Window.
Due to limitations in the MIDI protocol, you cannot rename disk volumes using MESA II.
If you want to do so, use the front panel of the Sampler and update Disk Window.
Check what's on the
Sampler Disk
Select Sampler par-
titions and volumes
Load selected items
into memory