User`s manual

Now two volumes are created on the SD card. Verify this with the "SLCT" option and proceed with
step 5. On this screen you have now the choice between V1 and V2:
*01 VOLUME - SLCT , CREATE V1 (turn JOG control to select V2 ).
*HD CONT 1 *HDRIVE 1 *RENAME 1 UNFM%
Repeat step 6 every time you need to create volumes.
A maximum of 128 volumes can be created on a SD card but around 70MB can be stored on a 2GB
or 4GB SD card. This is a little bit more than the 64MB which can be stored on a 100MB ZIP disk
with the optional IB109 SCSI board installed.
The GigaFile is perfectly working with the optional IB105 ACSI board installed and did not freeze
or crash up to now.
Page 17