Operation Manual
18
The one-touch timer recording feature provides a
simple and convenient way to make a timed
recording.
Turn on the TV, and select the AV-program
position on TV.
Preparation
Note:
During the OTR, any other function will not
operate.
4
Press REC/OTR twice. The recording will start
and stop after 30 minutes. Each additional press
of REC/OTR will increase the recording time for
another 30 minutes up
to a maximum of 6
hours (see table
below).
If REC/OTR is pressed once during the recording,
the remaining time appears on the screen. When
pressed again, the recording time is extended to the
nearest 30-minute interval.
One-Touch Timer Recording (OTR)
1
Load a blank cassette tape with the erase
prevention tab intact. (The VCR will automatically
turn on.)
2
Select the program you want to record with CH
or 10 number buttons.
3
If a recording in Long Play mode is intended,
press SPEED SP/LP to display "LP". To check
the tape speed, press CALL (see page 17).
1~9:
10~80:
e.g. 5 = press “5”
e.g. 29 = press “2” and “9”.
OTR 0 : 30
CH 29
INDEX
NRK2
VCR
VCR
Press REC/OTR
repeatedly until the
desired time appears on
the display.
To Extend the Recording Time
To stop the OTR
Press .
OTR 1 : 30
CH 29
NRK2
REC
VCR
Recording 0:30
1:00
1:30
2:00
3:00
4:00
6:00 5:00
REC
VCR
4G24801A (E)P16-19 10/1/03, 11:2018