Operation Manual

ManualsBrandsAkai ManualsVideoVS-K606N-E3(S)

When you try to connect with a cable, make sure the power of both units have been turned off.

Duplicating a Video Tape

Load a blank cassette tape with the erase

prevention tab intact into the recording VCR. Load

the previously recorded cassette tape into the

playback VCR or a video camera.

Use AV or CH of the recording VCR to select the

"A1", "A2" or "A3" rather than the preset channel.

Connection with Video camera

Connection with second Video recorder

Press PAUSE/STILL of both units simultaneously

to start the Duplicating.

Press PLAY-button and then PAUSE/STILL-

button of Playback unit.

Press REC/OTR and then PAUSE/STILL of

Recording unit.

A1(TV Scart Socket)

A2(VCR/DECODER Scart Socket)

A3 (Front AV jacks)

VIDEO-Output

AUDIO-Output (R)

AUDIO-Output (L)

AUDIO-

Input (R)

Playback unit

AUDIO/

VIDEO cable

(not supply)

AUDIO-

Input (L)

VIDEO-

Input

AUDIO-Input (R)

Playback on

camera

To AV socket

AUDIO/VIDEO

cable (not supply)

AUDIO-Input (L)

Recording unit

VIDEO-Input

For duplicating a

previously

recorded tape from

a video camera,

follow the video

camera

manufacturer's

instructions. A

simple video

camera dubbing

hookup is shown at

left.

VCR

Notes:

•

Before starting the duplicating process, select the

proper tape speed using SPEED SP/LP. For a pre-

recorded tape the correct tape speed will be set

automatically during playback.

Unauthorized recording of copyrighted television

programs, movies, video tapes and other materials

infringe on the rights of copyright owners and are

contrary to copyright laws.

CLOCK SET

SYSTEM SETUP

LANGUAGE/SPRACHE/LANGUE

LINGUA/LENGUA

AV2 [AV]

SELECT :

ENTER

:ENTER

EXIT

• Select the "AV2" in menu-

screen in the same way as the

step 1~3 on page 10. Then

press ENTER to select AV

mode.

TV Scart socket

VCR/DECODER

Scart socket

(not supply)

Recording unit

Playback

unit GOE4601

4G24801A (E)P20-BACK 10/1/03, 11:2022